Assembler

Job purpose

Responsible for assembly and / or scanning of small or medium sized parts, fitting and / or adjustment of interrelated parts and / or assembly, adjustment and / or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs.

Duties and responsibilities

• Maintains proper quality and quantities of manufactured materials.
• Operate small equipment such as presses, magnetizing / demagnetizing equipment, scanners.
• Perform SPC on all related jobs as required.
• Operate degreasing systems as required.
• Able to set-up equipment where applicable.
• Able to calibrate and zero equipment.
• Perform preventative maintenance.
• Use general measuring instruments, such as indicator, calipers, and height gages.
• Rotate from one job to another if needed.
• Maintain accurate documentation.
• Follows all established company policies
• Follows all established safety procedures and precautions. Including filing incident / accident reports.
• Notifies Supervisor of all unsafe / hazardous conditions or defective equipment.
• Other duties as assigned

Qualifications

Working conditions

Physical requirements

Hours : Monday through Thursday, 2 : 45 pm to 12 : 15 am, Fridays 2 : 45 pm - 6 : 45 pm

#ROC

Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority / Female / Sexual Orientation / General Identity / Disability / Veteran

B Shift :

Mon-Thurs : 2 : 45pm - 12 : 15am

Fri : 2 : 45pm - 6 : 45pm