Composite Mechanic- NKCR

POSITION SUMMARY

The Composite Mechanic performs inspections, troubleshooting, preventive maintenance and installation of locomotive mechanical systems, air equipment and electrical systems, and equipment such as : diesel engine, motors, generators, wheels, air brakes, wiring and lighting systems, and other mechanical and electrical components. Ensures work activities are in conformance with Federal Railroad Association (FRA), company, and customer specifications.

The Composite Mechanic demonstrates and adheres to the company values of : safety, honesty, ownership, respect, and teamwork to ensure successful partnerships with customers and employees that result in OmniTRAXs continued success.

ESSENTIAL RESPONSIBILITIES

Ensure compliance with all railroad rules and regulations for safety, operation, and the Federal Railroad Association (FRA)

Under direction of immediate supervisor, perform required inspections, troubleshooting and preventive maintenance : ensure locomotive mechanical, electrical and air systems conform to specifications and operate properly within design limits and intentions

Complete inspection and repair reports according to company and FRA specifications and guidelines

Following general safety rules, perform diagnostics, installation, and repair of locomotive components to ensure proper operation and compliance with required federal and company specifications

Accurately read, comprehend, interpret, and comply with diesel engine manuals, locomotive schematics, service bulletins, maintenance instructions and other craft related documentation for locomotives

Test, install and repair system components including, but not limited to : pumps, radiators, power assemblies, compressors, air brake repair and change, brushes replacement, commutator repair, panel lighting, circuit breakers, regulator repair and change; ensure all function and equipment conform to required specifications for a locomotive

Regularly examine and verify : flow and pressure measurements, installation and alignment of rotating equipment, control points, relays, and wiring; adjust or replace defective parts as needed

Conduct operational qualification of mechanical, electrical and air control systems; verify conformance to specifications on locomotives using a variety of test equipment and procedures i.e. : gages, dial indicators, manometers, meters, insulation break-down test devices, specialized tooling, and live system measurements

Read and adhere to FRA and company rules, specifications, and guidelines; legibly document items of non-compliance

Analyze and correct faults related to inspection, troubleshooting, preventive maintenance, and installation of locomotive equipment

Perform maintenance and repairs to company vehicles as required

Perform CDL work to meet qualifications of the FMCSA Code of Federal Regulations (CFR) Subpart B : Qualification and Disqualification of Drivers and other regulations as applicable, including but not limited to, Part 391.11

OTHER DUTIES

Assist in all other repairs and maintenance as required

Work safely to prevent on the job accidents and injuries

Wear required protective equipment such as : hard hats, hearing protection, safety-toe boots, or safety glasses

Maintain DOT qualifications

Work hours may include a nonstandard workweek, overtime, and various shift work

Perform other duties and projects as assigned

SUPERVISORY RESPONSIBILITIES

None

REQUIRED QUALIFICATIONS, KNOWLEDGE, SKILLS, AND ABILITIES

High School Diploma / GED

1-3 years of experience in the mechanical or electrical field, and / or diesel engines

Operate hand-tools appropriately

Operate power tools including : drills, grinders, and air impact wrenches properly for intended use

Read, comprehend, and comply with instructions provided in written, oral and schedule form, published rules, procedure and manuals, inspection checklists, government regulations, operation and maintenance instructions, memos, and other work-related information

Working knowledge of FRA, AAR, OSHA, and EPA rules and regulations specific to Locomotive

Write legibly to complete reports and other work documents

Professional integrity and accountability

Work in fast-paced, collaborative environment

Basic computer skills

REQUIRED CERTIFICATIONS AND LICENSES

Valid State Drivers License - CDL (or attain one within 90 days); pass medical certification and Drivers Qualification File, pass DOT Drug & Alcohol testing

D15.1 welding qualification

PREFERRED QUALIFICATIONS, KNOWLEDGE, SKILLS, AND ABILITIES

Previous experience in Rail Transportation, Supply Chain Logistics, Manufacturing and / or Oil & Gas industries

6 months to 3 years of job-related work experience

Knowledge and skills in locomotive or general mechanical, electrical and air repair, and maintenance

Read and interpret manuals, blueprints, service publications, wiring diagrams and flow diagrams

Operate various testing equipment such as : micrometer, dial indicator, gages, insulation test devices, voltmeters, ohm-meters

PREFERRED CERTIFICATIONS AND LICENSES

None

WORK ENVIRONMENT

Exposure to hot, cold, wet, humid, or windy conditions caused by the weather including snow, rain, heat, and sub-freezing temperatures; loud noise, petroleum-based products, and odors, moving mechanical parts, high pressure compressed air and occasionally live mechanical systems and / or high voltage electrical systems

TRAVEL

As business requires, to other locations in another state and / or country for several days to assist other OmniTRAX managed companies with repairs and maintenance

PHYSICAL REQUIREMENTS

Strength Occ Freq Cons Weight / Force Side Height From Height To

Lifting - Tools, Components and Parts X 35 lb Two Hands 0 in 60 in

Lifting - Knuckle X 85 lb Two Hands 0 in 46 in

Strength Occ Freq Cons Weight / Force Side Height Rotation

Pushing - Pallet Jack Two Locomotive Jacks X 72.5 lb Two Hands 49 in Pronated

Pushing - Wheel Set X 75.8 lb Two Hands 29 in Pronated

Pushing - Boxcar Truck Set X 98.8 lb Two Hands 25 in Pronated

Pushing - Ergo Bow Switch Push to Lock X 133.7 lb Two Hands 35 in Neutral

Pulling - Wheel Brake Box Car X 81.3 lb Right 23 in Neutral

Pulling - Ergo Bow Switch Unlock X 75.1 lb Two Hands 35 in Neutral

Pulling - Pin Lifter X 86 lb Two Hands 25 in Neutral

Pulling - Barrel Dolly X 97.5 lb Two Hands 59 in Pronated

Pulling - Pallet Jack Two Locomotive Jacks X 104.6 lb Two Hands Waist Pronated

Pulling - Boxcar Truck Set X 140.4 lb Two Hands 25 in Pronated

Grip & Pinch Occ Freq Cons Weight / Force Side Rotation Grip Setting / Type

Hand Grip - Cut Metal Banding from Pallet X 19.1 lb Either Neutral 3

Hand Grip - Ground Clamp X 26.6 lb Either Neutral 2

Hand Grip - Cut Large Gauge Car Wire X 43.2 lb Either Neutral 3

Hand Grip - Couple Air Hoses X 47 lb Right Neutral 3

Hand Grip - Couple Air Hoses X 47 lb Left Neutral 3

Upper Body Occ Freq Cons Description

Reaching - Below Knee X Extending hand(s) and arm(s) below the level of the knee.

Reaching - Over Shoulder X Extending hand(s) and arm(s) above shoulder level.

Reaching - Knee to Shoulder X Extending hand(s) and arm(s) between knee and shoulder level.

Handling - Both X Seizing, holding, grasping, turning, or otherwise working with hands.

Fingering - Fine Motor Manipulation X Picking, pinching, or otherwise working primarily with fingers.

Cervical Flexion / Extension X Flexing and / or extending at the cervical spine.

Rotation - Cervical X Rotating at the cervical spine.

Rotation - Thoracic & Lumbar X Rotating at the thoracic and lumbar spine.

Lower Body Occ Freq Cons Description

Sitting X Remaining in a seated position.

Standing X Remaining on ones feet in an upright position without moving about.

Walking X Moving about on foot.

Climbing X Ascending or descending between two points.

Balancing X Maintaining body equilibrium to prevent falling.

Stooping X Bending body forward by bending spine at the waist.

Kneeling - Two Knees X Bending legs at knees to come to rest on one or both knees.

Crouching / Squatting X Bending body downward and forward by bending legs and spine.

Crawling - Belly X Moving about on hands and knees or hands and feet.

• Occ = Occasional; defined as 1-33% of a usual and customary workday.
• Freq = Frequent; defined as 34-66% of a usual and customary workday.
• Cons = Constant; defined as 67-100% of a usual and customary workday.
• Not all tasks required at each location. Position and physical demand is representative, but individualized assessment may be necessary.

Physical Requirements % of Work Time

Auditory and visual acuity : interpret color; depth perception, focus, near and far sight 100%

Speak and hear clearly to communicate with employees and business associates 100%

Continuously stand or walk on level or uneven ground 60%

Bend, crouch, kneel at waist or knees while loading and unloading 30%

Lift, push, pull and carry up to 70lbs. 10%

Exert strength up to 125lbs. 75%

Exert strength up to 150lbs. 50%

by Jobble