Electrician Installation and Maintenance A - C2009

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electrician Install & Maintenance A to join our Fabrication team in

Everett, WA

As an Electrician Install & Maintenance A , you will install, maintain, test and troubleshoot electrical components and repair electrical systems (e.g., hydraulics, pneumatics, lighting, sub stations, power panels, floor mounted machines, fiber optics) in and outside the factory. These employees will work with engineering to develop programming for (PLC's) Programmable Logic Controllers and Variable Frequency Drives (VFDs). Voltages worked with AC / DC may range from 115,000 to 110v or less. This requires working knowledge of (WAC) Washington Administrative Code, (NEC) National Electrical Code, and site standards.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities :

Obtain work assignment from Team Leader, Plan Of the Day (POD / POW), CMMS, online systems or other appropriate sources (e.g., supervisor, engineer).

Obtain appropriate electrical drawings (e.g., wiring diagrams, schematics, manufacturing, project administrator sketches) for assigned job, as required.

Determine if system should be shut down or if work must be performed with power source on. Lock out, tag out, try out equipment and related systems, as required.

Perform primary and secondary test on electrical breakers during routine maintenance. Replace, update and retro fit breakers, as required.

Perform routine tests on high voltage switches and relays, using hipotential test equipment (Hipot), replace switch or relay, as required.

Troubleshoot electric motors using appropriate test equipment.

Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system.

Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel, boxes, transformers etc., as required.

Use laptop or HMI screens to program and / or troubleshoot PLC and VFD controlled systems on building and portable related equipment.

Service and maintain electrical systems on various types of overhead cranes and gantrys.

Operate, install electrical systems and perform functional test of building and / or plant equipment in hazardous and non-hazardous locations(e.g., machines, motor controls, room remodels), as required.

Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent,metal halide, LED, lighting controlled systems, standard) clean and check sockets, replace ballast and bulb, as required.

Run high voltage electrical cable from substation to unit station, cut and splice cable, test cable for resistance using a Hipot.

Install raceways (e.g. conduit cable tray) and all associated fittings, as required.

Pull wire of various gauge and color through conduit using a fish tape or tugger. Install and terminate field wiring to all associated devices (e.g., switches, relays, outlets, and drives).

Verify functionality of installation, ensuring it meets NEC, NFPA, and WAC codes.

Maintain a clear and understandable

written / verbal / electronic

tie in to communicate with other shifts, as required.

Maintain personal certifications and tool certifications, as required.

Handle and dispose of hazardous materials in approved manner.

Evaluate job for work to be performed (e.g., wire size, electrical load, conduit) in concurrence with engineering, as required.

Work with other crafts (e.g., millwrights, transportation, plumbers, mechanics, vendors) in appropriate sequence to accomplish tasks.

Direct equal or lower graded employees when assisting with electrical work.

Operate mechanical lifts of various types (e.g., tiger lift, spider lift, snorkel lift), to access area to be worked on, as required.

Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in electrical systems.

Establish / verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters), as required.

Maintain UPS, batteries, battery chargers, and battery maintenance systems.

Physical Demands and Potential Hazards :

Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

Work in environments that may involve contact with metals, solvents, and coolants.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

Adapt to varying noise levels and atmospheric conditions.

Utilize personal safety gear to protect face / eyes, hands / arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing / Workday will be considered as this job is not installed in QTTP (Quality Through Training Program)

Basic Qualifications

5+ years of experience

reading and understanding engineering drawings, blueprints, schematics, and specifications

5+ years of experience working with precision measuring tools

5+ years of experience using hand tools and / or hand-held power tools

5+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)

5+ years of experience working with industrial voltage electric systems

Basic Computer experience and competency

Must be physically able to lift / carry up to 35 pounds; push / pull using up to 45 pounds of force; and reach overhead up to six hours per day.

Typical Education & Experience :

High school graduate or GED preferred.

Relocation :

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace :

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement :

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement

This position is for a variety of shifts

Total Rewards & Pay Transparency :

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation

opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay

$41.00 / hour, with potential to earn up to $61.01 / hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Dec. 12, 2025

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer :

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military / veteran status or other characteristics protected by law.