Maintenance Mechanic - HVAC (Facilities) - Riverside City College

Maintenance Mechanic - HVAC (Facilities) - Riverside City College

Apply (by clicking the relevant button) after checking through all the related job information below.

Riverside Community College District

Application Deadline. Interested candidates must apply by the deadline listed below by 8 : 00 p.m., Pacific Standard Time :

Maintenance Mechanic - HVAC (Facilities) - Riverside City College

Department : Facilities (R)

Position Type :

Support Staff (Classified / Confidential)

College / Campus : Riverside

Physical location of the position :

Riverside

Employment Type : Full-Time

Position Length : 12-month

Salary Range : Grade L

Salary Amount : $6,629 - $8,069

Salary Type : Monthly

Is this position categorically (grant) funded?

No

Basic Function : BASIC FUNCTION

Performs skilled mechanical maintenance duties in the construction, diagnosis, repair, installation, and alteration of District heating, ventilation, air conditioning and refrigeration (HVAC) systems and related equipment and facilities; performs preventive maintenance and routine servicing of equipment to ensure efficient operation.

SUPERVISION RECEIVED AND EXERCISED

Receives general supervision from assigned area supervisor. May provide lead direction to temporary staff and / or student workers.

CLASS CHARACTERISTICS

This classification in the Maintenance series is responsible for independently performing skilled mechanical duties in support of the District's HVAC systems. Employees at this level exercise judgment and initiative in their assigned tasks, receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the department.

Education :

Education and Experience :

Completion of the twelfth (12th) grade and three (3) years of experience installing, maintaining, and repairing HVAC systems; or an equivalent combination of education, training, and / or experience.

Experience : Knowledge of :

1. Operational characteristics of various heating and cooling systems.

2. Commercial, industrial, and institutional electrical distribution systems and energy management systems.

3. Programming principles for automated logic and summit tracer type systems.

4. Boiler maintenance, installation, and repair.

5. Chemical usage required for cooling tower maintenance.

6. Diagnostic equipment used to troubleshoot and resolve HVAC system issues.

7. Piping and plumbing systems related to HVAC systems.

8. Industry safety regulations and precautions.

9. Mathematical principles.

10. Applicable federal, state, and local laws, rules, regulations, ordinances, and organizational policies

and procedures relevant to assigned area of responsibility.

Ability to :

1. Troubleshoot, diagnose, maintain, and repair a diverse range of heating and cooling systems and devices.

2. Install, evaluate, and make operating adjustments to heating and cooling systems.

3. Estimate materials and time necessary for project related maintenance and repair.

4. Size and design an air conditioning system to fit an application.

5. Read and interpret as-built blueprints and submittals.

6. Attend and participate in construction meetings.

7. Maintain and update maintenance records and schedules.

8. Apply basic knowledge to new and changing machine / system models.

9. Interpret local and state building codes and procedures as the related to HVAC systems.

10. Work with other trades to support and aide in job performance.

11. Place orders for maintenance and repair for building HVAC systems.

12. Exercise independent judgment within general policy, and procedural guidelines.

13. Effectively use computer systems, software applications relevant to work performed, and business

equipment to perform a variety of work tasks.

14. Communicate effectively in the course of performing work tasks.

15. Establish, maintain, and foster effective working relationships with those contacted in the course of work.

16. Demonstrate clear evidence of sensitivity and understanding of the diverse academic, socioeconomic, disability, and ethnic backgrounds of students, staff, and the community.

17. Provide efficient, high-level customer service to the public, vendors, contractors, and District personnel.

Licenses / Certifications :

Licenses and Certifications :

1. A valid driver's license and proof of insurability may be required to drive a District or personal vehicle.

2. Possession of valid Refrigerant Recovery and Recycling Equipment Certification and maintain certification throughout employment.

Other : PHYSICAL DEMANDS

Must possess mobility to work in the field; strength, stamina, and mobility to perform medium to heavy physical work; ability to sit, stand, and walk on level, uneven, or slippery surfaces; vision to read printed

materials and a computer screen, to distinguish colors, and to inspect and operate equipment; and hearing and speech to communicate in person and over the telephone. Employees frequently reach, twist, turn, kneel, bend, stoop, squat, crouch, grasp, and make repetitive hand movements in the performance of daily duties; work in confining spaces; climb and descend ladders; operate varied hand and power tools; operate motor vehicles and visit various District sites. The job involves fieldwork requiring frequent walking in operational areas to identify problems or hazards, which may include working on live electrical wires. Finger dexterity is frequently needed to operate and repair tools and equipment. Must also possess mobility to work in a standard office setting and use standard office equipment, including a

computer. Employees must possess the ability to lift, carry, push, and / or pull materials and objects averaging a weight of 50 pounds or heavier weights, with the use of proper equipment and / or assistance

from other staff.

The essential functions of this classification must be performed by the incumbents with or without reasonable accommodations.

ENVIRONMENTAL CONDITIONS

Employees in this classification work in the field and are exposed to loud noise levels, extreme cold and hot temperatures, inclement weather conditions, road hazards, vibration, confining workspaces, chemicals, mechanical and / or electrical hazards, hazardous physical substances, and fumes, dust, and air contaminants. Employees may interact with upset individuals in interpreting and enforcing departmental policies and procedures.

Duties and Responsibilities :

EXAMPLES OF TYPICAL JOB FUNCTIONS

1. Repairs / rebuilds mechanical drive systems including, but not limited to, replacement of drive bearings, shafting, blower wheel assemblies, multi-pulley and belt drives, and exhaust blower assemblies and motors for HVAC equipment.

2. Maintains and repairs hot and cold-water pumping systems including motor replacement, bearing and shaft seal replacement, mounting and alignment techniques for proper operation, and replacement of

rubber and chain drive couplings; repairs and rebuilds triple duty valve / Y strainer assemblies; checks valves, air and sludge separators, air bleeds and water treatment, air scavenging, and sludge removal.

3. Maintains and repairs cooling towers, evaporator condensers, and air-cooled condensers; maintains, repairs, and replaces fills elements, water distributors, filter screenings, piping, electrical components,

and control operations.

4. Maintains hot water boiler operation, including electronic and mechanical safety, primary and secondary pump systems and boiler ignition controls, chilled water systems operations, water flow dynamics, and piping-pumping configurations.

5. Maintains and repairs, as necessary, gas fired furnaces, infra-red heaters, and hydraulic systems.

6. Works and meets with contractors and vendors obtaining estimates, evaluations, reports, and pricing, and provides recommendations accordingly.

7. Attends and participates in pre-construction meetings for assigned projects and work.

8. Responds to emergency electrical and plumbing calls; assists other co-workers as required; may serve as contact person in the absence of the supervisor; provides instruction on the use and operation of

HVAC equipment; monitors HVAC over DDC / EMS computer systems; updates and maintains service logs.

9. Participates in District-provided in-service training programs.

10. Performs other related duties as assigned; specific duties not listed does not exclude them for this classification if the work is similar or related.

Conditions of Employment :

CONDITIONS OF EMPLOYMENT :

SALARY : Salary grades consist of nine steps. A new employee is normally placed on Step 1 of the grade. Changes in step placement take place on the first day of the first month following the anniversary date of attaining permanent classified employee status until the maximum of the grade is reached.

HOLIDAYS : There are 13 holidays observed each year. A pro-rata reduction will be made for employees working less than full-time and less than twelve months.

VACATION : Employees are granted 12 days of vacation per year through the first five years of service to the District; 15 days after completion of five continuous years of service to the District; and 22 days after completion of 10 continuous years of service to the District. This computation is based on full-time, twelve-month employment. A pro-rata reduction will be made for employees working less than full-time and less than twelve months.

SICK LEAVE : One day of sick leave for each month of service is granted. This is based on full-time, twelve-month employment. A pro-rata reduction will be made for employees working less than full-time and less than twelve months. There is no limit to the number of days of sick leave which may be accrued.

FRINGE BENEFITS : The District provides a health and welfare benefit package for employees and legal qualifying dependents. Those employees working less than full-time and less than twelve months will receive a pro-rata share of the benefit package. The dollar value of the package is a subject of negotiation between the District and the Bargaining Unit.

The work location and assignment within a job classification is determined by the District and may be subject to change.

All offers of employment will be contingent upon the availability of funds and approval by the Board of Trustees.

The Riverside Community College District (the District) fosters and maintains a work environment free from discrimination harassment or retaliation, where all persons are treated with dignity and respect. The District is a proud equal opportunity employer and does not discriminate against any person based on ethnic group identification, national origin, religion, age, gender, gender identity, gender expression, race, color, genetic information, sexual orientation, physical or mental disability, or any characteristic listed or defined in Section 11135 of the Government Code or any characteristic that is contained in the prohibition of hate crimes set forth in subdivision (1) of Section 422.6 of the California Penal Code, or any other status protected by law. The District adheres to these principles in all aspects of employment, including, recruitment, hiring, training, compensation, promotion, benefits, discipline and termination. All employees share in the responsibility for fulfilling the District's commitment to equal employment opportunity.

In addition, it is the policy of the District to provide reasonable accommodation to qualified applicants and employees. If you need assistance or an accommodation due to a disability or have inquiries regarding compliance or grievance procedures you may contact the District Compliance Officer and Title IX, Section 504 / ADA Coordinator Lorraine Jones as follows :

Lorraine Jones, Ed.D., M.S.W.

District Compliance Officer and Title IX / ADA / 504 Coordinator

3801 Market Street

Riverside, CA 92501

951-222-8039.

Work Hours / Work Days for Classified and Hourly Positions Only :

Tuesday - Saturday : 8 : 00 am - 4 : 30 pm

Required Applicant Documents :

Resume or Curriculum Vitae

Cover Letter

Optional Applicant Documents :

Other Document

Associate or Equivalent Transcript

Bachelors or Equivalent Transcript

Effective Employment Date :

Anticipated Start Date December 2025

Application Deadline :

Open Until Filled

Special Comments : IMPORTANT NOTICES :

• The first round of applicants will be reviewed on 5 / 12 / 25 and every two weeks after that until the position is filled.
• Only electronic, on-line applications are accepted. All supporting materials, required or optional, must also be in electronic formats and attached to the electronic, on-line application when applying. Supporting materials are only accepted as Adobe Acrobat (.pdf) or Microsoft Word files and must be less than 2 MB in size.
• An application will not be considered complete unless all Required Documents are electronically attached to the application by the Application Deadline date. An incomplete file may subject the candidate to disqualification.
• Paper applications and supporting materials WILL NOT be accepted!
• Letters of reference must be non-confidential and submitted electronically when applying on-line.
• Interested candidates must apply by the deadline listed above by 8 : 00 p.m., Pacific Standard Time.
• The Riverside Community College District does not require testing at the initial application filing period. As you progress through the selection process, you may be required to perform a job-related test based on the needs of the work area for which you are being considered.
• The District will make reasonable accommodations for applicants with disabilities. Applicant should contact Human Resources and Employee Relations at (951) 222-8595 for assistance.

Application Types Accepted :

Classified / Management / Confidential Application

To apply visit apply, please visit : ©2025 Inc. All rights reserved. xklufbp

Posted by the FREE value-added recruitment advertising agency

jeid-a2a91be7414acf4f87604f92219a70cb JobiqoTJN. Keywords : Maintenance Mechanic, Location : Riverside, CA - 92522