Design Release Engineer - Driveline & AxleOptimal Inc. • Auburn Hills, MI, US
Design Release Engineer - Driveline & Axle
Optimal Inc. • Auburn Hills, MI, US
6 days ago
Job type
- Full-time
Job descriptionCompletes all required technical source package documentation to support supplier quotes Evaluates designs for the best engineering practice documents and completes supplier design reviews Captures all lessons learned, and ensures timely execution of all calculations, analysis, and simulation in alignment with test plans and requirements Develops DFMEAs and evaluates designs for failure modes robustness Develops and executes component and subsystem DVP&R plans to validate all aspects of new designs and design changes, including DRBTR. Supports the development of the system DVP&Rs Develop tools, test procedures and acceptance criteria for driveline & axles, components, subassemblies and purchased assemblies Collaborates appropriate design detailing and CAE activities Ensure transfer functions and physics-based analysis are defined and documented for all actuation subsystems and components. Delivers EBOM, models, drawings for components, subassemblies, and purchased assemblies Generates engineering documentation in support of change management, including DRBFM Delivers parts / hardware to pilot builds, including requisitions for prototypes and ED&D. Collaborates with transmission and driveline systems subject matter experts, ACEs, DSEs, AEs, and other stakeholders to address and support any failures using the appropriate tools and processes. Prepares status reports and presentations for management and CE organization Supports manufacturing on production-related issues Generates cost reduction ideas and develops and executes corresponding design and validation plans. Participate in warranty / cost reduction meetings and develop solutions for warranty issues Conducts root cause analysis of driveline & axles failures and identify the root cause / s Conducts Layered Process Audits at supplier plants for assigned components. 5 years' experience minimum Bachelor of Mechanical / Mechatronics / Electrical Engineering degree or similar 2 years of experience in the automotive industry or product engineering design, validation and engineering projects development with OEM and / or tier(n) suppliers. OR a high potential College graduate with good knowledge about Automotive industry and driveline / Axles components / subsystems. Thorough understanding of vehicle functions and general vehicle architecture Understanding of typical automotive manufacturing and quality processes Advanced English language skills 90% (Read and Write). Proficient with MS Office. Leadership, organization, planning, decision making, and strategic thinking skills. Ability to navigate complex stakeholder relationships and uncertainty and effect lasting change through effective communication and experience. Proactive, Learning, self-driven, Teamwork oriented. Efficient work under pressure and high communication skills. Training in problem solving techniques. Must be able to manage multiple complex projects simultaneously. Must be able to lead and manage Suppliers. Some travel required to Supplier and Corporate Engine / Transmission / Vehicle Assembly Plants including USA, Canada & Mexico, or Europe / Asia. Assembly and computer aided design (NX / CATIA). Experience with Design Failure Mode & Effects Analysis (DFMEA). Experience with Design Verification Plan & Report (DVP&R) Experience with Geometric Dimensioning and Tolerancing (GD&T) Master's degree in mechanical / Mechatronics / Electrical Engineering highly desired Green / Black Belt in Shainin or DFSS Experience in transmission, driveline & axles or related areas Knowledge of Stellantis Systems and / or products a plus CAE / CFD experiences with Powertrain structures Experience with the fundamentals of CAN communications Experience with electric motors for automotive applications Knowledge of Casting and Injection Molding processes. Other languages : Italian or French Design / Development Experience of Driveline / Axles Validation (DVP&R) Technical Program Management On-Site 100% - Auburn Hills, MI
Job Description
Job Description
Job Description :
The Design and Release Engineer (DRE) Driveline & Axle Product Release Center acts as the owner of assigned driveline & axle components (e.g. Axles, RDM, PTU, T-Case, prop shaft, half shaft, brackets, etc.). Executes product design, analysis, release and testing per technical infrastructure and FCA PCPC (the "how").
Job Responsibilities :
- Responsible for the complete design and product delivery against technical requirements for the assigned components and products. Components and products may be complex, or include new technology, requiring related and relevant prior experience.
- Develop subject matter expertise for select components or assemblies assigned
- Coach entry level engineers as required
- Recognized as a single point of contact for suppliers' product engineering.
- Manages and tracks supplier product engineering activities and deliverables, including supplier test plans and test execution.
- Prepares product engineering work plans in accordance with program and project timing and milestones.
- Completes and documents for advanced analysis and simulation of actuation mechanisms, including electro-mechanical and servo-hydraulic subsystems.
- Executes engineering deliverables in adherence to technical infrastructure and product development process deliverables, reviews, signoffs, and report-outs, including :
Develops technical requirements for components and subsystems of driveline & axles including purchased assemblies.
Requirements :
Knowledge, Skills, and Abilities :
Preferred Qualifications :
Additional Information / Must Have's :
Create a job alert for this search
Design Release Engineer • Auburn Hills, MI, US
Related jobs The Design and Release Engineer (DRE) Driveline & Axle Product Release Center acts as the owner of assigned driveline & axle components (e.
Axles, RDM, PTU, T-Case, prop shaft, half shaft, b...Show more The Brake Interface Components Design Release Engineer is responsible for the design and validation of brake tubes, brake hoses, and wheel speed sensors.
The position will include all aspects of com...Show more 
The Design Release Engineer for the Turbocharger and Supercharger Systems is responsible for the design, development, and technical leadership in the creation, validation, and release of turbocharg...Show more
SHAPE THE FUTURE OF MOBILITY FROM DAY ONE.This position is part of our Signal & Power Solutions segment, Electrical Distribution Systems business group and is located in Troy, MI.We are seeking a D...Show more
Position based in Auburn Hills, Michigan (U.Eligibility to TN Visa required; must be a Canadian citizen (mandatory).Do you want to shape the world of tomorrow and work on innovative projects? Then ...Show more
The EDAG Group is a globally leading, independent engineering services provider that combines excellent engineering with the latest technology trends.
With a global network of some 60 branches, the ...Show more
Design Release Engineer – Cranks And Bearings> .Full Time • Windsor • •Segula Technologies Canada, Inc.Job Description We are seeking a Cranks and Bearings Design Release Engineer (DRE) to support the ...Show more
Wire Harness Design and Release Engineer.The Wire Harness Design and Release Engineer is responsible for the end-to-end design, validation, and release of wiring harness assemblies and associated c...Show more
Design and Release Engineer (DRE) Driveline & Axle is responsibilities include for but not limited to : .Responsible for the complete design and product delivery against technical requirements fo...Show more
Design Release Engineer- Restraints.Design, develop, validate, and release Restraints System commodities, subsystems, and components for the assigned programs.
Commodities include Seatbelts, Airbags...Show more The Design Release Engineer for Internal combustion Cranktrain components is responsible for the design, development, and technical leadership in the creation, validation, and release of these comp...Show more The Brake Interface Components Design Release Engineer is responsible for the design and validation of.The position will include all aspects of component design to ensure all system and vehicle lev...Show more 
We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomo...Show more Position based in Auburn Hills, Michigan (U.Eligibility to TN Visa required; must be a Canadian citizen (mandatory).Do you want to shape the world of tomorrow and work on innovative projects? Then ...Show more 
The Design and Release Engineer (DRE) Driveline & Axle Product Release Center acts as the owner of assigned driveline & axle components (e.
Axles, RDM, PTU, T-Case, prop shaft, half shaft, b...Show more
The candidate will be responsible for the Design, development and release of Advanced Driver Assist (ADAS) components - long / short range radar, cameras (human / machine vision), ultrasonic sensors, a...Show more
Design and Release Engineer (DRE) Driveline & Axle is responsibilities include for but not limited to : .Responsible for the complete design and product delivery against technical requirements fo...Show more Position based in Auburn Hills, Michigan (U.Eligibility to TN Visa required; must be a Canadian citizen (mandatory).Segula Technologies is a global engineering group serving all major industrial se...Show more
Design Release Driveline Engineer
Optimal Inc. • Auburn Hills, MI, US
Full-time
Last updated: 6 days ago • Promoted
Design Release Engineer
Optimal Inc. • Auburn Hills, MI, US
Full-time
Last updated: 30+ days ago • Promoted
Design & Release Engineer- Turbocharger and Supercharger Systems
Stellantis • Auburn Hills, MI, US
Full-time
Last updated: 2 hours ago • Promoted • New!
Design Release Engineer
Aptiv • Troy, MI, United States
Full-time
Last updated: 30+ days ago • Promoted
Design Release Engineer - Cranks and bearings
Segula Technologies • Windsor, ON, Canada
Full-time
Last updated: 16 days ago • Promoted
Design Release Engineer (DRE)
EDAG, Inc. • Troy, MI, US
Full-time
Last updated: 30+ days ago • Promoted
Design Release Engineer – Cranks And Bearings Segula Technologies Canada, Inc.
Downtownwindsor • Windsor, ON, CA
Full-time
Last updated: 2 days ago • Promoted
Design Release Engineer
KCM Technical • Windsor, ON, CA
Full-time
Last updated: 2 days ago • Promoted
Design Release Engineer - Driveline
InDepth Engineering Solutions, LLC • Auburn Hills, MI, US
Full-time
Last updated: 30+ days ago • Promoted
Design Release Engineer- Restraints
G-TECH Services • Dearborn, MI, US
Full-time
Last updated: 28 days ago • Promoted
Design Release Engineer - Powercell Components
Optimal Inc. • Auburn Hills, MI, US
Full-time
Last updated: 30+ days ago • Promoted
Design Release Engineer - Brakes
InDepth Engineering Solutions, LLC • Auburn Hills, MI, US
Full-time
Last updated: 6 days ago • Promoted
Design Release Engineer - Mechatronics - Interior Devices and Sensors
ALTEN Technology USA • Auburn Hills, MI, US
Full-time
Last updated: 8 days ago • Promoted
Engine Cooling Design Release Engineer
Segula Technologies • Windsor, ON, Canada
Full-time
Last updated: 30+ days ago • Promoted
Design Release Engineer - Driveline & Axle
Optimal Inc. • Auburn Hills, MI, USA
Full-time
Quick Apply
Last updated: 7 days ago
Design Release Engineer
RGBSI • Windsor, Windsor, CA
Full-time
Last updated: 2 days ago • Promoted
Design Release Engineer - Driveline / Axel
G-TECH Services, Inc. • Auburn Hills, MI, US
Full-time
Last updated: 30+ days ago • Promoted
Active Damping Design Release Engineer
Segula Technologies • Windsor, ON, Canada
Full-time
Last updated: 30+ days ago • Promoted