Refrigeration Technician

Job Description

Job Description

Job Description : Job Description

Primary Responsibility :

Under minimal supervision, work independently, performing advanced   refrigeration maintenance and repair throughout the warehouse. Provide   maintenance support as necessary to ensure operational objectives are met.   Other areas of knowledge, including but not exclusive to : mechanical,   electrical, hydraulic, pneumatic, PLC, fabrication and welding, ammonia, and   plumbing. Will direct and oversee the work of contractors on occasion.

What You'll Do :

Defines and sets up ideal operational settings and parameters for all   refrigeration equipment (i.e. superheat, regulators, pressure settings,   defrost cycles, etc.) Proactively monitor system performance, and take   appropriate actions to ensure that the system is operating optimally.

Pumps out / evacuates refrigerant as necessary for component level   replacement and / or repair.

Provides in depth troubleshooting of refrigeration, electrical, mechanical,   and controls systems to root cause and recommends corrective action

Performs calibrations (slide valve, potentiometers, RTDs, pressure   transducers, etc.)

Replaces components within the refrigeration's system, with safe LOTO   procedures and in accordance with PSM program.

What Experience and Education You Need :

High school diploma or general education degree (GED) required.

5 years Industrial Refrigeration maintenance experience, which must include   ammonia refrigeration.

Completion of RETA Operator 1 & 2 courses preferred. In lieu of RETA   course - successful completion of industry recognized Industrial Ammonia   Refrigeration training (Stellar, Frick, GCAP / Lanier or employer comparable   training program), equivalent in scope will be considered.

RETA CIRO certification preferred.

Troubleshooting and repairs with differing control systems ALTA / Allen   Bradley etc.

Required to be trained in HAZMAT, obtain and maintain the certification.

What Could Set You Apart :

Fully competent in mechanical knowledge (all level 3 requirements).

Requires strong communication and interpersonal skills.

Must be able to work unsupervised.

Proficient use of testing equipment.

Must be able to work flexible shifts, if required, including on call.

Physical Requirements :

The physical demands described below are representative of those that must be   met to successfully perform the essential functions of the job. Reasonable   accommodation may be made to enable individuals with disabilities to perform   the essential functions of the job.

May be required to tolerate working environment with inside controlled   temperatures of -20 degrees Fahrenheit and outside ambient temperatures   (including heat, cold and precipitation).

Must be able to work at heights in excess of 35 ft. and be able to access   elevated platforms and catwalks

Must be able to climb ladders and stairs.

Frequently required to stand; walk; push; pull; reach with hands and arms;   stoop; kneel; and crouch

Must frequently lift and / or move up to 50 pounds.

Must be able to use hand and power tools.

Specific vision abilities required by this job include close vision,   distance vision, color vision and depth perception. Either naturally or with   the aid of eye glasses (use of contacts are prohibited when working with   ammonia).

Able to work nights and weekends.

Able to pass a physical and respiratory exam.

Work Environment :

The work environment characteristics described here are representative of   those an employee encounters while performing the essential functions of this   job. Reasonable accommodations may be made to enable individuals with   disabilities to perform the essential functions.

$ 30.00 / hr

LI23

LILive24