Composite Mechanic- NKCR

POSITION SUMMARY

The Composite Mechanic performs inspections, troubleshooting, preventive maintenance and installation of locomotive mechanical systems, air equipment and electrical systems, and equipment such as : diesel engine, motors, generators, wheels, air brakes, wiring and lighting systems, and other mechanical and electrical components. Ensures work activities are in conformance with Federal Railroad Association (FRA), company, and customer specifications.

The Composite Mechanic demonstrates and adheres to the company values of : safety, honesty, ownership, respect, and teamwork to ensure successful partnerships with customers and employees that result in OmniTRAX’s continued success.

ESSENTIAL RESPONSIBILITIES

• Ensure compliance with all railroad rules and regulations for safety, operation, and the Federal Railroad Association (FRA)
• Under direction of immediate supervisor, perform required inspections, troubleshooting and preventive maintenance : ensure locomotive mechanical, electrical and air systems conform to specifications and operate properly within design limits and intentions
• Complete inspection and repair reports according to company and FRA specifications and guidelines
• Following general safety rules, perform diagnostics, installation, and repair of locomotive components to ensure proper operation and compliance with required federal and company specifications
• Accurately read, comprehend, interpret, and comply with diesel engine manuals, locomotive schematics, service bulletins, maintenance instructions and other craft related documentation for locomotives
• Test, install and repair system components including, but not limited to : pumps, radiators, power assemblies, compressors, air brake repair and change, brushes replacement, commutator repair, panel lighting, circuit breakers, regulator repair and change; ensure all function and equipment conform to required specifications for a locomotive
• Regularly examine and verify : flow and pressure measurements, installation and alignment of rotating equipment, control points, relays, and wiring; adjust or replace defective parts as needed
• Conduct operational qualification of mechanical, electrical and air control systems; verify conformance to specifications on locomotives using a variety of test equipment and procedures i.e. : gages, dial indicators, manometers, meters, insulation break-down test devices, specialized tooling, and live system measurements
• Read and adhere to FRA and company rules, specifications, and guidelines; legibly document items of non-compliance
• Analyze and correct faults related to inspection, troubleshooting, preventive maintenance, and installation of locomotive equipment
• Perform maintenance and repairs to company vehicles as required
• Perform CDL work to meet qualifications of the FMCSA Code of Federal Regulations (CFR) Subpart B : Qualification and Disqualification of Drivers and other regulations as applicable, including but not limited to, Part §391.11

OTHER DUTIES

SUPERVISORY RESPONSIBILITIES

REQUIRED QUALIFICATIONS, KNOWLEDGE, SKILLS, AND ABILITIES

REQUIRED CERTIFICATIONS AND LICENSES

PREFERRED QUALIFICATIONS, KNOWLEDGE, SKILLS, AND ABILITIES

PREFERRED CERTIFICATIONS AND LICENSES

WORK ENVIRONMENT

TRAVEL

PHYSICAL REQUIREMENTS

Strength Occ Freq Cons Weight / Force Side Height From Height To

Lifting - Tools, Components and Parts X 35 lb Two Hands 0 in 60 in

Lifting - Knuckle X 85 lb Two Hands 0 in 46 in

Strength Occ Freq Cons Weight / Force Side Height Rotation

Pushing - Pallet Jack Two Locomotive Jacks X 72.5 lb Two Hands 49 in Pronated

Pushing - Wheel Set X 75.8 lb Two Hands 29 in Pronated

Pushing - Boxcar Truck Set X 98.8 lb Two Hands 25 in Pronated

Pushing - Ergo Bow Switch Push to Lock X 133.7 lb Two Hands 35 in Neutral

Pulling - Wheel Brake Box Car X 81.3 lb Right 23 in Neutral

Pulling - Ergo Bow Switch Unlock X 75.1 lb Two Hands 35 in Neutral

Pulling - Pin Lifter X 86 lb Two Hands 25 in Neutral

Pulling - Barrel Dolly X 97.5 lb Two Hands 59 in Pronated

Pulling - Pallet Jack Two Locomotive Jacks X 104.6 lb Two Hands Waist Pronated

Pulling - Boxcar Truck Set X 140.4 lb Two Hands 25 in Pronated

Grip & Pinch Occ Freq Cons Weight / Force Side Rotation Grip Setting / Type

Hand Grip - Cut Metal Banding from Pallet X 19.1 lb Either Neutral 3

Hand Grip - Ground Clamp X 26.6 lb Either Neutral 2

Hand Grip - Cut Large Gauge Car Wire X 43.2 lb Either Neutral 3

Hand Grip - Couple Air Hoses X 47 lb Right Neutral 3

Hand Grip - Couple Air Hoses X 47 lb Left Neutral 3

Upper Body Occ Freq Cons Description

Reaching - Below Knee X Extending hand(s) and arm(s) below the level of the knee.

Reaching - Over Shoulder X Extending hand(s) and arm(s) above shoulder level.

Reaching - Knee to Shoulder X Extending hand(s) and arm(s) between knee and shoulder level.

Handling - Both X Seizing, holding, grasping, turning, or otherwise working with hands.

Fingering - Fine Motor Manipulation X Picking, pinching, or otherwise working primarily with fingers.

Cervical Flexion / Extension X Flexing and / or extending at the cervical spine.

Rotation - Cervical X Rotating at the cervical spine.

Rotation - Thoracic & Lumbar X Rotating at the thoracic and lumbar spine.

Lower Body Occ Freq Cons Description

Sitting X Remaining in a seated position.

Standing X Remaining on one’s feet in an upright position without moving about.

Walking X Moving about on foot.

Climbing X Ascending or descending between two points.

Balancing X Maintaining body equilibrium to prevent falling.

Stooping X Bending body forward by bending spine at the waist.

Kneeling - Two Knees X Bending legs at knees to come to rest on one or both knees.

Crouching / Squatting X Bending body downward and forward by bending legs and spine.

Crawling - Belly X Moving about on hands and knees or hands and feet.

Physical Requirements % of Work Time

Auditory and visual acuity : interpret color; depth perception, focus, near and far sight 100%

Speak and hear clearly to communicate with employees and business associates 100%

Continuously stand or walk on level or uneven ground 60%

Bend, crouch, kneel at waist or knees while loading and unloading 30%

Lift, push, pull and carry up to 70lbs. 10%

Exert strength up to 125lbs. 75%

Exert strength up to 150lbs. 50%