Quality NDT Inspector I

REPORTS TO : Quality Inspection Supervisor or Quality Inspection Foreman

SUPERVISES : Not Applicable

DUTIES / RESPONSIBILITIES :

• Performs in-process quality assessments during vessel construction, including compliance audits prior to external surveys, utilizing Visual Testing (VT), or other non-destructive testing (NDT) inspection methods.
• Consults with Class Surveyors and / or Customer Representatives during external inspections as necessary.
• Provides guidance to production employees and Supervision for workmanship corrections required.
• Shall document, accept or reject workmanship based upon contract acceptance criteria for surface inspections.
• Provides mentoring and on-the-job-training (OJT) for NDT certification of other Inspectors.
• Must be willing to work any shift.
• Complies with Austal's employee handbook general guidelines, company procedures and policies.
• This position description is not intended to be all-inclusive. Incumbents will perform other tasks as assigned.

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE :

ADDITIONAL GUIDELINES :

Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA :

TOOLS : Familiar with use and function of basic power and hand tools.

PHYSICAL REQUIREMENTS :

The physical demands described here are representative of those that must be met by

an employee to successfully perform the essential functions of this job. Must be able to

tour all vessels and work sites.

While performing the duties of this job, the employee is regularly required to stand,

walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and

balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally

required to sit.

Specific physical requirements include the following :

1. Must have the ability to bend, squat, stoop, crawl, and kneel.

2. Perform prolonged standing.

3. Ability to turn head from side to side and about the vertical axis.

4. Ability to turn body at the waist from side to side and about the vertical axis.

5. Lift / push / pull 50lbs to 75lbs on an occasional basis.

6. Lift / push / pull up to 20lbs on a frequent basis.

7. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).

8. Ability to work at heights above 12' while working from ladders, scaffolding and / or man lifts.

9. Able to work at a variety of levels (ex. waist, eye, overhead).

10. Demonstrate the ability to safely and appropriately use required tools and equipment.

11. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.

12. Possess sufficient handgrip and coordination to carry and operate tools and equipment.

13. Ability to utilize personal protective equipment (hard hat, safety glasses, steeltoes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.

14. Ability to withstand cold and hot temperatures.

15. Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time.

16. Able to respond to verbal and audible sounds / commands.

17. Able to utilize adequate visual skills.

18. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.

19. Ability to perceive attributes of an object / material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and / or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB.

SAFETY

Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.

Equal Employment Commitment

Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance : 251-445-1932.

Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.