Skilled Dry Wall

Job Description

Job Description

Measure and mark surfaces to lay out work, according to blueprints or drawings, using tape measures, straightedges or squares, and marking devices.

• Measure materials or objects for installation or assembly.
• Mark reference points on construction materials.

Read blueprints or other specifications to determine methods of installation, work procedures, or material or tool requirements.

Fit and fasten wallboard or drywall into position on wood or metal frameworks, using glue, nails, or screws.

Measure and cut openings in panels or tiles for electrical outlets, windows, vents, plumbing, or other fixtures, using keyhole saws or other cutting tools.

Hang dry lines to wall moldings to guide positioning of main runners.

Hang drywall panels on metal frameworks of walls and ceilings in offices, schools, or other large buildings, using lifts or hoists to adjust panel heights when necessary.

Assemble or install metal framing or decorative trim for windows, doorways, or vents.

Coordinate work with drywall finishers who cover the seams between drywall panels.

Trim rough edges from wallboard to maintain even joints, using knives.

Cut and screw together metal channels to make floor or ceiling frames, according to plans for the location of rooms or hallways.

Inspect furrings, mechanical mountings, or masonry surfaces for plumbness and level, using spirit or water levels.

Cut fixture or border tiles to size, using keyhole saws, and insert them into surrounding frameworks.

Install horizontal and vertical metal or wooden studs to frames so that wallboard can be attached to interior walls.

Cut metal or wood framing and trim to size, using cutting tools.

Scribe and cut edges of tile to fit walls where wall molding is not specified.

Fasten metal or rockboard lath to the structural framework of walls, ceilings, or partitions of buildings, using nails, screws, staples, or wire-ties.

Suspend angle iron grids or channel irons from ceilings, using wire.

Seal joints between ceiling tiles and walls.

Mount tile, using adhesives, or by nailing, screwing, stapling, or wire-tying lath directly to structural frameworks.

Apply cement to backs of tiles and press tiles into place, aligning them with layout marks or joints of previously laid tile.

Nail channels or wood furring strips to surfaces to provide mounting for tile.

Install blanket insulation between studs and tack plastic moisture barriers over insulation.

Install metal lath where plaster applications will be exposed to weather or water, or for curved or irregular surfaces.

Wash concrete surfaces before mounting tile to increase adhesive qualities of surfaces, using washing soda and zinc sulfate solution.

Apply or mount acoustical tile or blocks, strips, or sheets of shock-absorbing materials to ceilings or walls of buildings to reduce reflection of sound or to decorate rooms.

Remove existing plaster, drywall, or paneling, using crowbars and hammers.

Felons are encouraged to apply!

Powered by JazzHR

Q5M7Dcie9K