Gelcoat Technician

Our vision is to electrify all waterborne vessels, and we're starting with electric water sport boats.

Gas boats dominate today's marine industry not because of great product offerings but because of a lack of better alternatives. Boaters have grown accustomed to vehicles that feel stuck in the 1980s : unreliable, expensive, loud, noxious, and a nightmare to own and operate. They're also awful for the water and air they reside in.

By contrast, electric boats are superior in nearly every way : not only are they far more reliable and less costly to operate, but they're also quieter, quicker, and cleaner, with no fumes or pollutants. However, they've been held back by both the technology and the talent to make them truly competitive with gas alternatives. That's Arc's opportunity.

Using modern, aerospace- and automotive-inspired techniques, we're building our hulls, batteries, cooling systems, firmware, and software together to deliver the next generation of watercraft.

Who we're looking for

We're seeking someone who is excited by our vision, eager for a challenge, and willing to learn on the job. We pride ourselves on transparency and operate in a lean, high-trust environment that encourages ownership. As a full-time member of our Production team working from our manufacturing facility in Torrance, CA adaptability is key in our fast-moving, dynamic startup environment.

Core responsibilities

• Assist with testing and development of gelcoat or other coating-related processes
• Prepare tools or work surfaces (stripping, sanding, masking, waxing, releasing, and / or priming)
• Prepare or mix gelcoat or other coatings
• Apply gelcoat or other coatings via spray guns or other methods
• Buff and polish surfaces as required to meet specifications
• Clean and maintain critical equipment related to gelcoat or coating processes
• Assist with other composites production processes (skin coat, lamination, composite repairs) as needed
• High school diploma or equivalency certificate
• 3+ years of experience in set-up and operation of spray-based paint or gelcoating systems
• High attention to detail with the ability to identify and correct imperfections in gelcoat finishes
• Strong hand-eye coordination and manual dexterity for precise gelcoat application
• Ability to stand for 6–10 hours per day, lift up to 50 lbs, and pass a respirator fit test
• Ability to work independently with minimal supervision
• Comfortable working at a fast but sustainable pace
• Experience with production gelcoating of fiberglass boats or other marine products
• Experience repairing fiberglass boats or other marine products
• Enthusiasm for boating and clean energy

At Arc, we encourage diversity and consider all qualified applicants equally for employment, regardless of background, identity, or status. You're always welcome to reach out even if you don't meet many of these qualifications. Passion and aptitude make up for a lot.

Our values

We value these five things above all else :

Given that we work in a sometimes intense or stressful environment, it's vital that our values align. We'd be happy to elaborate on any or all of these during the interview process.

What we offer

Hope to hear from you soon!

Apply for this job

indicates a required field

First Name

Last Name

Email

Phone

Resume / CV

Enter manually

Accepted file types : pdf, doc, docx, txt, rtf

Enter manually

Accepted file types : pdf, doc, docx, txt, rtf

LinkedIn Profile

Are you legally authorized to work in the country where this position is based? Select...

Will you now or in the future require sponsorship for employment authorization? Select...

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey.Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiringprocess or thereafter. Any information that you do provide will be recorded and maintained in aconfidential file.

As set forth in Arc Boat Company's Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection.As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measurethe effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categoriesis as follows :

A "disabled veteran" is one of the following : a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Select...

Voluntary Self-Identification of Disability

Form CC-305

Page 1 of 1

OMB Control Number 1250-0005

Expires 04 / 30 / 2026

Voluntary Self-Identification of Disability

Form CC-305 Page 1 of 1 OMB Control Number 1250-0005 Expires 04 / 30 / 2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor's Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov / ofccp .

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your "major life activities." If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to :

Disability Status Select...

PUBLIC BURDEN STATEMENT : According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

J-18808-Ljbffr