Pipe Welder

Pipe Welder Ship Repair Industry

Pay : $29 / hr

Type : Local & Non-Local Accepted

Shifts : 1st & 2nd Shift Available

Job Overview :

We are seeking a qualified Pipe Welder to join our ship repair team. This position involves executing high-quality welding of piping systems in a marine / shipyard environment. The successful candidate will demonstrate compliance with rigorous fabrication, alignment, and inspection standards typical of ship repair yards.

Overall Responsibilities :

Interpret and work from blueprints, isometrics, piping drawings, and welding symbols to layout, fit, and weld pipe systems (including carbon steel, stainless steel, copper-nickel, other alloys).

Perform TIG (GTAW), Stick (SMAW), and / or appropriate welding processes on pipe systems for steam, fuel, water, air, or other shipboard services.

Ensure proper cutting, preparation, beveling, tack welding, root passes, fill-passes and cap welds in accordance with approved procedure specifications.

Install pipe supports, brackets, hangers and anchor points; align pipe runs; fit and secure pipe sections in shipboard and shop environments.

Work under marine ship-repair conditions : inside tanks, under decks, in confined or elevated spaces, on scaffolding or dry-dock settings.

Comply with shipyard and marine fabrication quality and inspection standardsvisual inspections, dimensional tolerances, weld profile control, and non-destructive testing readiness.

Follow all safety protocols : PPE, confined-space entry, fall protection, hot work permits, shipyard environment hazards.

Requirements / Qualifications :

Minimum 3 years of pipe-welding experience in a ship repair, marine fabrication or heavy industrial environment.

Must be a U.S. Citizen .

Must pass a written test (covering blueprint reading, pipe isometrics, welding symbols, fabrication processes) and a tack / weld test (hands-on welding assessment for pipe systems) prior to hire.

Ability to interpret and apply WPS (Welding Procedure Specifications) , follow weld procedure guidelines, understand acceptance criteria (e.g., weld size, penetration, reinforcement, allowable defects).

Physically capable of working in shipyard conditions : lifting up to 50 lbs, climbing ladders / scaffolds, working in elevated / confined spaces, working in shipboard environments with varying lighting, overhead hazards, moisture, and noise.

Familiarity with marine materials and alloys (carbon steel, stainless, copper-nickel) and their welding demands is preferred.

Commitment to adhere to all PPE and shipyard safety standards; ability to maintain a clean, safe, efficient work space.

Apply Today