Radiographer LPCT 861

MISSION :

To produce radiographs to customer and PCC specifications for evaluation of castings.

PRINCIPAL ACCOUNTABILITIES :

1. Setup

Objective : to accurately set up castings for radiography.

Essential Job Functions :

A. Checks routing or requests to determine x-ray needs on parts.

B. Reviews Technique Cards to determine setup requirements including x-ray techniques part positions and Film / IP requirements based on Techniques Cards.

C. Sets up additional radiographs of defect areas not covered by Technique Cards.

D. Inspect condition and maintain Film / IP and cassettes. Follow proper handling techniques.

E. Sets up castings on tables in x-ray machines including fixturing placement of Film / IPs and DICOM tag identification and penetrameters on Film / IP; sets exposure parameters.

F. Determines priority of radiographs to be taken.

G. Develops best practice setup requirements for newly developed techniques when needed.

H. Visually inspects castings for dirt penetrant grinding debris etc.

2. X-Ray Operation

Objective : to effectively and accurately operate x-ray machines and produce radiographs within customer specifications.

Essential Job Functions :

A. Operates x-ray machine control panels and equipment to take multiple views of castings adjusting radiographic variables such as tube height voltage and exposure times within customer specifications.

B. Monitor Maintain and generate exposures for System Qualifications on X-ray equipment per customer and PCC specifications.

C. Regularly conducts more than one radiographic examination concurrently and is expected to be able to operate all machines.

D. Removes Film / IP from casting for image processing while maintaining proper Film / IP handling techniques .

E. After image processing checks samples of radiographs on each casting for inner fearing Artifacts clarity coverage pixel value and sensitivity; makes changes within customer and PCC specifications; records any changes made; reshoots exposure when needed.

F. Willingness to be audited without notice by all Auditors both PCC Internal and External auditing groups. e.g. PCC NDTE NADCAP ISO 9000etc.

3. Trains mentors and assists less skilled Radiographers with setup and operational techniques as needed and assigned. (Marginal job function in NDTE departments)

4. Completes logs and records and records any modifications to Technique Card specifications.

5. Meets all production and quality standards.

6. Safety

Objective : to take responsibility for and demonstrate safe work practices; to comply with PCC radiation safety practices.

Essential Job Functions :

A. Adheres to plant and department safety rules.

B. Safely operates all equipment and tools.

C. Identifies and reports safety problems.

OTHER (MARGINAL) ACCOUNTABILITIES

7. Performs other tasks as directed and other x-ray department personnel activities.

ESSENTIAL EQUIPMENT VEHICLES TOOLS AND / OR MACHINERY :

1. x-ray machines

2. hoists

3. pallet jacks

4. pentrameters

5. styrofoam blocks

6. wooden wedges and blocks

7. straps and chains

8. clamps

9. Digital IPS (Image Processing Station)

10. image detectors (imaging plates or IPs and digital panels)

11. lead back ups

12. levels protractors rulers tape measure angle finders

13. cassettes

14. fixtures

15. calculators

16. cameras (technique development and NDTE departments only)

TRAINING

1. Training is provided on the job.

2. Radiography Level 1 Courses must be completed (radiation safety digital method training etc.)

3. Radiographer Level l Certification must be completed for all modalities (Film CR DDA).

4. Must re-certify - Level 1 every five years.

QUALIFICATIONS

1. Radiography skills as demonstrated by the competent performance of all duties OR an equivalent combination of classroom training and work experience.

2. High school graduation of GED (necessary for NDT Certification)

3. Ability to perform basic mathematical calculations. (addition subtraction multiplication division)

4. Ability to read follow and interpret Technique Cards Quality Control Manuals and other technical specifications.

5. Ability to communicate effectively both verbally and in writing.

6. Physical ability to perform the essential job functions.

PCC Structurals is committed to a diverse workforce. As Equal Opportunity Employer VEVRAA Federal Contractor affirmative action employer we provide equal opportunity to all persons regardless of race religion age gender disability status as a protected veteran national origin color or any other classification in accordance with federal state and local statutes regulations and ordinances Minority / Female / Disability / Veteran Status / VEVRAA Federal Contractor. Veterans are encouraged to self-identify as PCC Structurals desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA).

In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973 the Vietnam Veterans Readjustment Act of 1974 and Title I of the Americans with Disabilities Act of 1990 applicants that require accommodation in the job application process may contact for assistance. PCC Structurals is a VEVRAA Federal Contractor committed to providing priority referrals of protected veterans for its openings. Veterans are encouraged to self-identify as desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA). If you would like more information about Equal Employment Opportunity as an applicant under the law please visit

Key Skills

Business Consulting,Feed,Accountancy,Dos,Field,Jboss

Employment Type : Full-Time

Experience : years

Vacancy : 1