Final Inspector - Radiographic 2nd Shift

Primary Function :

Process castings through radiographic inspection in compliance with company and customer

specifications.

Tools and Equipment :

X-ray machines, x-ray film processors, densitometer, blueprints, etc.

Material :

Aluminum, copper and brass castings, inspection stamps, x-ray film, cassettes, x-ray filn developer.

Direction of Others :

None

Working Procedure :

With guidance and supervision from the Department Supervisor, the Quality Assurance staff, and the

Final Inspector A , the Final Inspector - Radiographic

THE FOLLOWING ARE THE USUAL MAJOR JOB DUTIES BUT THIS JOB DESCRIPTION DOES NOT PRECLUDE THE PERFORMANCE OF

OTHER DUTIES BY THE INCUMBENT.

1 Shall adhere to all safety requirements as posted on the job safety card.

2 Shall consistently follow all applicable work instructions.

3 Shall receive daily work assignments from the department supervisor or lead person.

4 Shall process castings through radiographic inspection, processing and reading, as prescribed

in the instructions in the Non Destructive Test folders.

5 Shall accept or reject casting(s), or lots, based on results of the inspection techniques used.

6 Shall faithfully apply all applicable specifications, and report any apparent deviations to the Quality

Assurance Manager.

7 Shall attend and successfully complete hazardous material / waste handling classes.

8 Shall maintain all necessary inspection records and files, in addition to a variety of logs where

accuracy is paramount.

9 Shall maintain the work area in a clean and orderly condition, and keep noise level to a minimum.

10 Shall safeguard the use of the stamp(s) issued to them, as outlined in the Final Inspection

instructions.

11 Must achieve and maintain Level 1 RT certification in radiographic inspection within ninety days

of start date.

12 Shall attend and successfully complete lockout / tagout training.

13 Shall perform other duties as assigned.

Work Environment :

A clean working environment, free of most contaminants, with a minimum amount of noise.

Special Skills Required :

Must have 20 / 25 near vision (correctable).

Must be able to distinguish colors.

Must have sufficient strength and manual dexterity to perform the physical demands of the job.