Precision Aerospace CNC Programmer

CNC Programmer

Own the Code. Drive the Cut.

This is not programming for the faint of heart - it’s for those who thrive on the toughest geometries, the tightest tolerances, and the highest stakes. As a CNC Programmer at Northeast Tool, you’ll be the architect behind precision machining, turning complex aerospace models into efficient toolpaths with Mastercam, CIMCO probing, and Vericut validation. You’ll command multi-axis DMG Mori machines cutting exotic alloys, where every decision you make impacts quality, efficiency, and performance at the highest level.

From our Matthews, NC facility - just outside Charlotte - you’ll join an award-winning team that values mastery, innovation, and problem-solving. We back your expertise with competitive pay, relocation assistance, top-tier benefits, and cutting-edge technology. Bring your best skills to the table, and we’ll give you the machines, the projects, and the freedom to push boundaries and set new standards in aerospace manufacturing.

Position Overview:

Northeast Tool is seeking an experienced CNC Programmer (level I, II, or III – dependent upon experience) to join our Engineering team. The CNC Programmer performs analysis of drawings and models and creates a program within Mastercam to machine the materials to the specifications in the most efficient manner on simultaneous 5-axis mill machines. This includes utilization of CIMCO probing and validating programming through Vericut. They are responsible for creating the process for complex, precision machining on high dollar exotic material assets. This process includes creating a set-up sheet, tooling list, creating a critical dimension sheet or control and manufacturing plan, and responsible for managing tooling to standardized tooling and submitting requisitions as required. They also support manufacturing with troubleshooting as needed.

What You’ll Do

• Perform complex programming in Mastercam for horizontal and vertical mills, and lathes, working with a variety of materials (Inconel, Monel, Hastelloy, Aluminum, Stainless Steel, etc.).

• Perform detailed analysis of component parts configuration/dimensions to determine the most efficient machining operations required for production.

• Use Mastercam to calculate and write programs for CNC machines to fabricate component parts to stated engineering specifications for aircraft and space engine hardware, continuously improving upon existing processes and updating programs accordingly.

• Verify programming through Vericut simulation software.

• Define and maintain machining processes by studying customer blueprints and testing manufacturing methods, tooling, and equipment.

• Communicate with and assist Manufacturing Engineering for the design and development of work holding, custom tooling, and gauging to meet customer inspection specifications to support production schedules, as needed.

• Support the production floor with hands-on technical support by troubleshooting problems and implementing solutions to keep machines running conforming parts.

• Drive continuous improvement and cost reduction opportunities in machining processes by leveraging new cutting and automation tools with external vendors.

• Manage tooling being returned from completed jobs (evaluate condition, sharpen as needed, and put away in vending solution, etc.).

• Create and maintain tool set up sheets, record programming changes, document programs on engineering checklists, and sustain appropriate engineering paperwork.

• Support, mentor, and train CNC Programming Technicians and CNC Programmer level's I and II; dependent upon experience and level assigned.

• Distribute workload to, review work of, and lead CNC Programming Technicians and CNC Programmers as appropriate; dependent upon experience and level assigned.

• Participate in and support continuous improvement efforts.

• Act as subject matter expert to lead corrective action and root cause analysis discussions utilizing the appropriate method and tool (i.e. fishbone, 5-why, etc.).

• Act as point of contact for Programming department and liason for workflow communication with Quality, Management, and Operations; dependent upon experience and level assigned.

• Other duties as assigned.

What We Are Looking For:

• Bachelor’s Degree (B.S.) from a four-year college or university (Engineering degree strongly preferred).

• 3 – 8 years’ programming experience with multi-axis machining; simultaneous 5-axis programming experience highly preferred. An equivalent combination of education and/or experience may be considered.

• Strong proficiency in GD&T ; GD&T ASME Y14.5 - 2018 foundational level certification, or ability to obtain within 3 months of hire.

• Experience with 5 axis CNC machining set-up and operations.

• Experience with Mastercam, certification a plus.

• Demonstrable experience with SolidWorks.

Preferred Qualifications:

• Previous experience in an AS9100 Environment strongly preferred.

• Proficiency with Siemens and/or Fanuc controllers and DMG Mori machine tool experience.

• GD&T ASME Y14.5 - 2018 advanced level certification.

• Mastercam Certifications: Mill 2D, Mill 3D, Lathe, 4-Axis; Multi-Axis and/or Advanced Lathe certifications strongly preferred.

• Certified SolidWorks Associate (CSWA), or Certified SolidWorks Professional (CSWP).

• Experience with Vericut software.

• Experience with Six Sigma; Certified Six Sigma Yellow Belt (CSSYB) or higher.

Pay Rate:

$80,000 - $140,000, depending on level of experience and required/preferred qualifications.

About Northeast Tool & Manufacturing:

We are an award-winning company with a focus on creating an employee-centric culture that enables us to continue to grow by delighting our customers.

In addition to fulfilling work with structured roles and responsibilities coupled with individual development and training plans, Northeast Tool offers relocation assistance, 9 paid holidays (including your birthday), 4% 401K match through Fidelity, free coffee, and education assistance. The company has a top 15% benefit plan with a dedicated Northeast Tool Nurse & Pharmacist on staff to help our team members navigate their healthcare.

• Competitive pay

• Medical, dental, vision, and life insurance

• Company Matched 401K (Roth and Traditional)

• Challenging and rewarding career

• Family, team-focused working environment

We believe the only way our company can grow is when we nurture the growth of our employees. We are committed to working hard, having fun, and making an impact in our community.

Sound too good to be true? Apply today to join our team.

You should be proficient in:

• GD&T
• Dovetail CNC
• Bachelor's Degree
• CNC Tooling
• 5 Why (Root Cause Analysis Method)
• CNC Programming
• Standard Operating Procedures (SOPs)
• G-Code
• Process Engineering
• Production Optimization
• Design for Manufacturability (DFM)
• Six Sigma Experience
• Troubleshooting CNC Machines
• CAD/CAM Software
• AS9100 Experience
• Blueprint Reading

Machines & technologies you'll use:

• Manufacturing Execution Systems (MES)
• CAD Software (Solidworks)
• CAM Software (Mastercam)
• CNC Mill (5+ axis VMC) (Dmg Mori Seiki)
• Horizontal Machining Center (5+ axis)