Outside Machinist II (SRS)EPSILON SYSTEMS • Portsmouth, VA, US
Outside Machinist II (SRS)
EPSILON SYSTEMS • Portsmouth, VA, US
2 days ago
Job type
- Full-time
Job descriptionStrictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery. Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded. Strictly adheres to safety, quality standards. Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc. Ensures all tools listed on the "Required Tools List" are available for use within two weeks of your employment. Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and / or other guidance given by management. Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.). Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations. Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations. Performs component and / or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs. Performs and / or verifies mechanical alignments. Insures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions. Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.). Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation. Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.). Assists in rigging when necessary. Other duties as assigned. High diploma or equivalent / Apprenticeship Diploma / Additional vocational courses or technical school graduate; and / or military / civilian experience with marine mechanical systems in a repair department or shipyard. 3 years' experience. Has knowledge of the trade qualifications and performs as an level II Outside Machinist. Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade. Has working knowledge of shipboard mechanical systems (repair / installation practices, procedures, alignments and troubleshooting) and blue print reading. Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment. Will assist in rigging evolutions when necessary. Communicates effectively Works independently or in a group. Ability to do basic math, i.e. add, subtract, divide and multiply. Ability to read, write, speak, and comprehend English. Ability to obtain and maintain National Security Clearance Level Secret. Ability to obtain and maintain base access to assigned government / military / private installations. Ability to travel. Current security clearance Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises. Able to move in narrow and restricted passageways, up / down steep and narrow ladders or stairways, and up and down antenna masts / yardarms (onboard ships). Able to lift, carry and move objects up to 50 lbs. in weight. Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects. Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects. Able to perceive and distinguish normal range of colors. May be required to wear personal protective equipment (PPE) including but not limited to : hard hat, safety glasses / goggles, ear plugs / muffs, masks / respirators, safety vests, gloves and steel-toe boots.
Job Description
Epsilon Systems is seeking a full time Outside Machinist II for the Ship Repair Sector located in Portsmouth, VA.
Summary : Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.
Responsibilities : \n
- Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his / her responsibilities.
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n \n
Requirements : \n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n \n
Preferred Qualifications
\n
ADA Notations : \n
\n
\n
\n
\n
\n
\n
\n \n
Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
Create a job alert for this search
Machinist Ii • Portsmouth, VA, US
Related jobs
Global - a 1st Flagship Company.Individual Accountability, Growth, Integrity, and Respect.As a leader in Marine Support Services and Emergency Management, we have proudly supported the Department o...Show more
Perdiem for those who qualify).Newport News Shipbuilding facility.This role demands familiarity with shipboard mechanical systems, the ability to work from technical drawings, and a strong commitme...Show more
Shipyard Staffing / NSC Staffing.NSC Staffing is seeking experienced Outside Machinist Technicians for an exciting upcoming project in Norfolk, Virginia.
We seek candidates with 3-10 years of experien...Show more
Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.W...Show more
IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.Port with a mobile full time workforce that ensures that a quality product is delivered on time every ...Show more
Tidewater Staffing is currently seeking Outside Machinists for work in various local shipyards including locations of Newport News, VA, Norfolk, VA, and Portsmouth, VA.
The Outside Machinist must po...Show more
Job Opportunity : Outside Machinist (with DOD access areas).Per Day Worked for Per Diem (Non-Local).Schedule : Full-Time, Contract | 40 hrs / week.
Install, align, and repair shipboard mechanical system...Show more
Under limited supervision, installs new machines or heavy equipment according to layout plans, blueprints, or other drawings, and dismantles and installs machines or heavy equipment when changes in...Show more Epsilon Systems is currently seeking a.SUBSAFE Outside Machinist Specialist.Repairs, modifies or overhauls various types of.
Sets up and operates portable machining tools or equipment.Reports direct...Show more Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry.We develop products and services for use throughout the lifecycle of an offshore oilf...Show more Epsilon Systems is currently seeking a.Summary : Repairs, modifies or overhauls various types of.Sets up and operates portable machining tools or equipment with constant supervision.Reports directly...Show more Epsilon Systems is currently seeking a full-time.Repairs, modifies or overhauls various types of.Sets up and operates portable machining tools or equipment with constant supervision.Reports directl...Show more 
Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.W...Show more
Installs, maintains, and repairs ship’s propulsion and auxiliary systems; including, but not limited to, Steam, Turbine, Electrical, and Diesel propulsion systems, rudders and steering gear, ...Show more
Venture Dynamics is seeking experienced Outside Machinists to join our team in supporting the repair of US Naval Vessels in Hampton Roads.
Must have at least 4+ years experience working on ABS and o...Show more
Clearance Level Must Currently Possess : .Clearance Level Must Be Able to Obtain : .Machining, Machining Processes, Maintenance Machining.
Outside Machinist (US Navy Submarine).Portsmouth Naval Shipyard...Show more Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry.We develop products and services for use throughout the lifecycle of an offshore oilf...Show more Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry.We develop products and services for use throughout the lifecycle of an offshore oilf...Show more
Outside Machinist
Global, a 1st Flagship Company • Portsmouth, VA, US
Full-time
Last updated: 2 days ago • Promoted
Outside Machinist
Hutco Inc • Portsmouth, VA, US
Full-time
Last updated: 30+ days ago • Promoted
Outside Machinist
Shipyard Staffing LLC • Norfolk, Virginia, United States
Full-time +1
Quick Apply
Last updated: 30+ days ago
Outside Machinist III $3,000 Sign on Bonus
Oceaneering International, Inc. • Chesapeake, VA, United States
Full-time
Last updated: 26 days ago • Promoted
Outside Machinist
International Marine and Industrial Applicators • Portsmouth, VA, US
Full-time
Last updated: 2 days ago • Promoted
Outside Machinist
Tidewater Staffing • Chesapeake, VA, US
Full-time
Last updated: 2 days ago • Promoted
Outside Machinist
Lead Staffing • Newport News, VA, US
Full-time
Last updated: 30+ days ago • Promoted
1st Class Outside Machinist ID : 582
Fairlead • Newport News, VA, US
Full-time
Last updated: 12 hours ago • Promoted • New!
Outside Machinist Specialist Subsafe
EPSILON SYSTEMS • Portsmouth, VA, US
Full-time
Last updated: 2 days ago • Promoted
Outside Machinist II $3,000 Sign-On Bonus
Oceaneering International, Inc. • Chesapeake, VA, United States
Full-time
Last updated: 26 days ago • Promoted
Outside Machinist II Subsafe
EPSILON SYSTEMS • Portsmouth, VA, US
Full-time
Last updated: 2 days ago • Promoted
Outside Machinist III Subsafe
EPSILON SYSTEMS • Portsmouth, VA, US
Full-time
Last updated: 2 days ago • Promoted
Outside Machinist III $3,000 Sign on Bonus
Oceaneering • Chesapeake, VA, US
Full-time
Last updated: 2 days ago • Promoted
Outside Machinist
Ameri-Force • Newport News, VA, US
Full-time
Last updated: 30+ days ago • Promoted
Outside Machinist
Venture Dynamics • Norfolk, Virginia, United States
Full-time
Quick Apply
Last updated: 16 days ago
Outside Machinist (US Navy Submarine)
General Dynamics - GDIT • Portsmouth, VA, US
Full-time
Last updated: 2 days ago • Promoted
Inside Machinist III or Specialist $3,000 Sign-On Bonus
Oceaneering International, Inc. • Chesapeake, VA, United States
Full-time
Last updated: 26 days ago • Promoted
Outside Machinist II $3,000 Sign-On Bonus
Oceaneering • Chesapeake, VA, US
Full-time
Last updated: 2 days ago • Promoted