Talent.com
Manufacturing Tech III

Manufacturing Tech III

Plasma-Therm LLCSaint Petersburg, FL, US
30+ days ago
Job type
  • Full-time
Job description

Job Description

Job Description

Description : SUMMARY :

Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results.

DUTIES AND RESPONSIBILITIES :

NOTE : The Manufacturing Technician III performs all duties of Manufacturing Technician II, and performs the following duties on All ranges of products and equipment including prototype systems. Work is performed with limited or no direct supervision.

  • Facilitates equipment applying water, electrical power and leveling machinery in temporary installation
  • Positions and assembles complex Electro / mechanical parts and assemblies part according to blueprints, schematics and / or standard procedures using hand tools
  • Performs complex mechanical alignments and calibration of equipment to the quality standards of ATP (Acceptance Test Procedure) and other procedures that are used during the test cycle of the products
  • Performs and verifies others leak checks on vacuum and mechanical assemblies using leak detection systems
  • The ability to operate and demonstrates the proper usage of impedance meters and other specialized electronic test equipment
  • Debugs equipment, including electrical, RF, mechanical, and vacuum systems, to facilitate power-up and gathering of test data. Records and reports test data
  • Maintains Class 10,000 through 100 clean room requirements
  • Provides guidance and training for other technicians to the quality standards specified on procedures and the ATP
  • Corresponds and works with Engineering, Planning and other departments on prototype systems.
  • Writes and develops procedures for others technicians to follow
  • Prepares systems for shipment, including cleaning, break down, preparation of miscellaneous list, and interface with Shipping
  • It is every employee’s responsibility to be aware of and adhere to the applicable Safety & Health, Quality and Environmental Process of Plasma-Therm LLC.

SUPERVISORY RESPONSIBILITIES :

None

Requirements : QUALIFICATIONS :

  • Associate’s Degree from two-year college or technical school or military training
  • Minimum three (3) years of directly related experience as a test technician
  • SKILLS AND ABILITIES :

  • Ability to interpret blueprints drawings, schematics, technical procedures, and other related material
  • Troubleshoot using DMM, O-scope, Ohm Megger and other measuring equipment
  • Ability to read, interprets, and follows safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to apply basic mathematical skills to solve technical problems
  • Proficient in use of crimpers, torque wrenches, vacuum leak detectors, soldering iron, and other assembly / test hand tools
  • Working knowledge of Windows Office
  • Ability to work independently with little or no direct supervision
  • Ability to adapt to a changing schedule
  • WORK ENVIRONMENT and PHYSICAL DEMANDS :

  • The normal work environment is typical of manufacturing clean room facility and support areas such as stockroom, machine shop, and laboratory.
  • The incumbent is routinely required to sit, stand, walk, stoop, kneel, touch, see, and hear, and may be required to lift or move up to 50 pounds, over 50 pounds with assistance
  • While performing the regular duties of the position, the incumbent is regularly exposed to moving mechanical parts, risk of electrical shock, and possible exposure to toxic or caustic chemicals. The incumbent must be able to wear safety equipment and follow safety instructions.
  • Plasma-Therm is an equal employment opportunity employer, in accordance with applicable federal and state laws for qualified employees and applicants without regard to race, religion, color, sex, age, national origin, sexual orientation, gender identity, marital status, genetic information, protected veteran or disability status. When requested and necessary, we provide reasonable accommodations for qualified individuals with disabilities.

    Create a job alert for this search

    Manufacturing Tech • Saint Petersburg, FL, US

    Related jobs
    • Promoted
    Manufacturing Tech I - 2nd Shift

    Manufacturing Tech I - 2nd Shift

    Plasma-Therm LLCSaint Petersburg, FL, US
    Full-time
    This position is for 2nd Shift Only (3 : 00 - 11 : 30PM) • •.Training will start on first shift (7AM - 3 : 30PM) for the first 4-6wks. Facilitates, sets up, build, calibrates, tests and breakdown of plasma ...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Core Blue Light 1st Shift (P)

    Manufacturing Technician Core Blue Light 1st Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will be measuring Cores to ensure dimensional acceptance for mold processing.Participating in training and cross training in production areas. Following work instructions to inspect and produce part...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Core Blue Dye Operator 3rd (P)

    Manufacturing Technician Core Blue Dye Operator 3rd (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    You will be ensuring the quality and consistency of blue dye products through thorough inspection and testing processes.This role involves monitoring production processes, conducting quality checks...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Core Borescope 3rd Shift(P)

    Manufacturing Technician Core Borescope 3rd Shift(P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    You will be working with visual inspection of various components utilizing a borescope unit.Operators conduct visual inspection in accordance with component work orders and indication maps.Visual i...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Rough Special Process - 1st Shift (P)

    Manufacturing Technician Rough Special Process - 1st Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will be working with core material from the inside of the castings, loading and unloading parts into core removal baskets. Will be flushing parts and monitoring core removal cycle performance using ...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Tech II

    Manufacturing Tech II

    Plasma-Therm LLCSaint Petersburg, FL, US
    Full-time
    Facilitates, sets up, builds, calibrates, tests, and breakdown of plasma processing equipment and records results.NOTE : The Manufacturing Technician II performs all duties of Manufacturing Technici...Show moreLast updated: 30+ days ago
    Manufacturing Tech III

    Manufacturing Tech III

    Plasma-ThermSt. Petersburg, Florida, United States
    Full-time
    Quick Apply
    Facilitates set up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. The Manufacturing Technician III performs all duties of Manufacturing Tec...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Wax Ultrasonic Testing 2nd Shift (P)

    Manufacturing Technician Wax Ultrasonic Testing 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Permanent
    Will be testing wax patterns to ensure dimensional acceptance for mold processing.Participating in training and cross training in production areas. Inspecting and producing parts of exceptional qual...Show moreLast updated: 2 days ago
    • Promoted
    Manufacturing Supervisor (3rd Shift)

    Manufacturing Supervisor (3rd Shift)

    1007 Clarios, LLCTampa, FL, United States
    Full-time
    Manufacturing Supervisor (3rd Shift).The Manufacturing Supervisor is responsible for ensuring that production requirements are met, appropriate staffing levels are maintained, employee relations ar...Show moreLast updated: 22 days ago
    • Promoted
    Manufacturing Technician V

    Manufacturing Technician V

    Plasma-Therm LLCSaint Petersburg, FL, US
    Full-time
    Sets up, calibrates, and tests plasma processing equipment and records results.Provides technical team leadership to ensure integration and test tasks are completed defect-free and on time, and tha...Show moreLast updated: 30+ days ago
    • Promoted
    • New!
    Manufacturing Engineering Asc. Manager

    Manufacturing Engineering Asc. Manager

    Lockheed Martin CorporationOldsmar, FL, United States
    Full-time
    At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thin...Show moreLast updated: 3 hours ago
    • Promoted
    Manufacturing Technician IV

    Manufacturing Technician IV

    Plasma-Therm LLCSaint Petersburg, FL, US
    Full-time
    Sets up, calibrates, and tests plasma processing equipment and records results.Provides technical team leadership to ensure integration and test tasks are completed defect-free and on time, and tha...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Bench 2nd Shift (P)

    Manufacturing Technician Bench 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the G...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Core Finishing 1st Shift (P)

    Manufacturing Technician Core Finishing 1st Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will be using different tools such as files, ultrasonic machines, and sandpaper.As well as patching cores using an alumina-based material according to work instructions in the Gibsonton, Florda loc...Show moreLast updated: 30+ days ago
    • Promoted
    1st shift Maintenance Technician, Manufacturing

    1st shift Maintenance Technician, Manufacturing

    ICP GroupTampa, FL, US
    Full-time
    Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets.ICP Group ...Show moreLast updated: 23 days ago
    • Promoted
    Manufacturing Technician - Rough Special Process 3rd Shift (P)

    Manufacturing Technician - Rough Special Process 3rd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    In this role, you’ll lead by driving manufacturing and repair processes, development, and improvement projects, and collaborating with combustion design and repair engineering groups to innov...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Wax - Core Prep 2nd Shift (P)

    Manufacturing Technician Wax - Core Prep 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will be working with cores to get them ready for injection in the Gibsonton Florida location.How You’ll Make an Impact.Inspect cores after completion to ensure that the cores have acceptable ...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Rough ACT Grind Operator - 2nd Shift (P)

    Manufacturing Technician Rough ACT Grind Operator - 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will ensure the proper operation of the machines according to production specifications to produce parts of them in accordance with acceptable quality specifications in the Gibsonton Florida locati...Show moreLast updated: 2 days ago