Talent.com

Manual machinist Empleos en Charlotte nc

Crear una alerta de empleo para esta búsqueda

Manual machinist • charlotte nc

Última actualización: hace 2 días
  • Oferta promocionada
CNC Lathe Machinist (2nd Shift, Mon - Fri, 4pm - 12am)

CNC Lathe Machinist (2nd Shift, Mon - Fri, 4pm - 12am)

Siemens Energy, Inc.Charlotte, NC, US
A tiempo completo
At 4 : 00 PM, the team gathers with the supervisor for a shift kickoff meeting to discuss a daily safety topic, job assignments, and shift goals. Following the meeting, the focus shifts to the assigne...Mostrar másÚltima actualización: hace más de 30 días
  • Oferta promocionada
3rd Shift Machinist

3rd Shift Machinist

Regal RexnordCharlotte, NC, US
Indefinido
Regal Rexnord") is a leading manufacturer of electric motors, electrical motion controls, power generation and mechanical power transmission products and sub-systems, serving customers around the w...Mostrar másÚltima actualización: hace más de 30 días
Manual Ethical Hacker

Manual Ethical Hacker

Bank of AmericaCharlotte
A tiempo completo
Manual Ethical Hacking is part of the Application Development Security Framework Program within Bank of America’s Cyber Security Assurance Offensive Security group. The program provides services to ...Mostrar másÚltima actualización: hace más de 30 días
Senior Manual QA Tester

Senior Manual QA Tester

Apex SystemsCharlotte, NC
A tiempo completo
Quick Apply
Test management tool and test case writing experience.Full testing life cycle experience.Get requirements (typically JIRA), write test plan, test cases, execute test cases manually and report on th...Mostrar másÚltima actualización: hace más de 30 días
Machinist - Nuclear

Machinist - Nuclear

Energy SolutionsCharlotte, NC, US
Indefinido
Quick Apply
The machinist is responsible for setting up and operating a variety of machine tools, including both CNC and manual machines, to produce precision parts and instruments. They fabricate and modify pa...Mostrar másÚltima actualización: hace más de 30 días
  • Oferta promocionada
2nd Shift CNC Mill / Lathe Machinist

2nd Shift CNC Mill / Lathe Machinist

Element Materials TechnologyCharlotte, NC, United States
A tiempo completo
Shift CNC Mill / Lathe Machinist.Element has an opportunity for a.As a member of the operations team, the Machining position performs a variety of routine and non-routine machining assignments within...Mostrar másÚltima actualización: hace 2 días
  • Oferta promocionada
Manual Machinist

Manual Machinist

National Roll KoteCharlotte, NC, US
A tiempo completo
National Roll Kote is seeking a Machinist to join our team in Charlotte, North Carolina.The ideal candidate will have a background in machining and proficiency in operating various manual machine e...Mostrar másÚltima actualización: hace más de 30 días
Sr. QA Tester (Automated and Manual)

Sr. QA Tester (Automated and Manual)

Ryan Consulting GroupCharlotte, North Carolina
A tiempo completo
Experience with (but not necessarily expertise in) : General Software Quality AssuranceWriting test plansEffective testing techniquesRegression TestingJira or other planning and tracking toolWorking ...Mostrar másÚltima actualización: hace más de 30 días
Manual Machinist (Various Shifts) - P

Manual Machinist (Various Shifts) - P

Siemens EnergyNorth Carolina, Charlotte
A tiempo completo +1
Manual Machinist (Various Shifts) - P.United States of America North Carolina Charlotte Company Siemens Energy, Inc.Organization Gas Services Business Unit Central Full / Part time Full-time Experi...Mostrar másÚltima actualización: hace 20 días
  • Oferta promocionada
Manual QA Tester

Manual QA Tester

VirtualVocationsCharlotte, North Carolina, United States
Temporal
A company is looking for a Manual QA Tester for a 6+ month contract position.Key Responsibilities Conduct regression, functionality, and UAT testing for the transition to ScriptMed Cloud Collabo...Mostrar másÚltima actualización: hace 16 días
CNC Lathe Machinist (2nd Shift, Mon - Fri, 4pm - 12am)

CNC Lathe Machinist (2nd Shift, Mon - Fri, 4pm - 12am)

Siemens Energy, Inc.Charlotte, NC, US
Hace más de 30 días
Tipo de contrato
  • A tiempo completo
Descripción del trabajo

A Snapshot of Your Day

At 4 : 00 PM, the team gathers with the supervisor for a shift kickoff meeting to discuss a daily safety topic, job assignments, and shift goals. Following the meeting, the focus shifts to the assigned lathe, where machining of a new generator rotor shaft begins.

Upon arrival at the lathe, the electronic production system is accessed to review shop notes from the previous shift. Work instructions are then consulted, and equipment is set up for the production order. The machine setup is completed by adjusting the steady rests and changing the steady rest shoes to the correct diameter.

Once the setup is finalized, collaboration with a crane operator facilitates the loading of the rotor into the lathe. After aligning the rotor, the necessary cutting tool for the first operation is installed. Machining operations commence and continue until the end of the shift.

Before leaving, shop notes are documented in the electronic production system for the third shift team, allowing for a smooth transition in machining. The rotor will remain in the lathe for the next seven days, undergoing machining operations across three shifts each day.

How You'll Make an Impact

  • Machine large electrical generator rotor shafts, which are typically made from 50 to 70-ton high alloy steel forgings
  • Setup and align using steady rests
  • Operate one or more of the following machine tools : Tacchi CNC Lathe (18-meter length, 110-ton capacity), Ferrel CNC Lathe (17-meter length, 300-ton capacity), Ferrel CNC Lathe (11-meter length, 60-ton capacity), Ferrel CNC Lathe (16-meter length, 160-ton capacity), and Betts-Bridgeford Manual Lathe
  • Teach and / or mentor employees in the Siemens Energy Apprenticeship Program
  • Engage in continuous improvement by applying 5S methodology as a component of a Lean production system

What You Bring

  • A high school or associate's degree with 4+ years of manual and CNC lathe experience, preferably using steady rest supports
  • Solid Understanding of G- and M-codes
  • Basic mathematical knowledge
  • Ability to read and interpret sophisticated drawings, specifications, charts, and tables
  • Ability to use precision measuring instruments
  • Ability to acquire fork truck and crane license through Siemens Energy internal certification programs
  • Successful applicants must be able to pass hearing, vision, and pulmonary tests through Siemens Energy's onsite medical team in addition to CRC testing.

    About the Team

    Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.

    Who is Siemens Energy?

    At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.

    Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.

    Find out how you can make a difference at Siemens Energy : https : / / www.siemens-energy.com / employeevideo

    Rewards

  • Career growth and development opportunities
  • Supportive work culture
  • Company paid Health and wellness benefits
  • Paid Time Off and paid holidays
  • 401K savings plan with company match
  • Parental leave
  • Regional Statements]

    https : / / jobs.siemens-energy.com / jobs

    Equal Employment Opportunity Statement

    Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

    California Privacy Notice

    California residents have the right to receive additional notices about their personal information. Click here to read more .