Electronics Design Engineer III New Playa Vista, California, United States

Turning Space into a Transportation Layer for Earth

Who We Are :

Eras of humanity can often be defined by a dominant transportation mode - horse drawn chariots, ocean going boats, or aircraft. These were spurred by a small group of people rigorously focused on building technology to achieve faster access to more of the world. We seek to usher in a new era of humanity defined by universal access to the whole globe free of borders and the presence of a routine way from space to Earth. To do this, we are building highly maneuverable re-entry vehicles that can loiter in orbit before precision landing back on Earth.

About the Role

As an Electronics Design Engineer at Inversion, you will work as part of the simulation team to design, develop, and test the electronics hardware components and integrated systems that supports the simulation and test environments for our flight systems. The simulation team is responsible for ensuring that flight software and flight hardware can be continuously integrated and tested under realistic flight conditions. You will play a key role in the design and development of specialized electronics hardware that will enable fast, repeatable development and deployment workflows across the engineering stack. Your work will empower Inversion's engineering teams to iterate rapidly throughout the development life cycle and will strengthen Inversion's ability to put our products into the hands of our customers with unprecedented speed and agility.

What You'll Do

• Design and develop electronics hardware needed to enable on-demand, hardware-in-the-loop ( HIL ) simulation workflows
• Create schematics and layouts for custom hardware
• Oversee the fabrication process
• Perform acceptance testing to ensure hardware meets specifications
• Contribute to the design and development of a simulation system capable of automatically provisioning and deploying resources to support simulation workflows

Required Qualifications

Desired Qualifications

Our office headquarters is located in Playa Vista, CA. This position requires in office presence.

The California annual base salary for this role is currently $122,000 - $144,000. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations : interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education and experience, certifications, abilities of the candidate and internal equity.

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere .

Inversion provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, or disability.

Inversion collects and processes personal data in accordance with applicable data protection laws. If you are a US Job Applicant see the CCPA Privacy Policy Notice for further details.

Apply for this job

indicates a required field

First Name

Last Name

Email

Phone

Resume / CV

Enter manually

Accepted file types : pdf, doc, docx, txt, rtf

Enter manually

Accepted file types : pdf, doc, docx, txt, rtf

LinkedIn Profile

Website

What are your base salary ($USD) expectations?

If you're currently outside a commutable distance, are you open to relocating to our corporate headquarters in Playa Vista, CA?

Are you authorized to work in the United States without sponsorship?

Were you referred to Inversion by a current employee? Select...

If you were referred, please provide the name of the employee.

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Do you meet the above criteria?

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey.Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiringprocess or thereafter. Any information that you do provide will be recorded and maintained in aconfidential file.

As set forth in Inversion's Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection.As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measurethe effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categoriesis as follows :

A "disabled veteran" is one of the following : a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Select...

Voluntary Self-Identification of Disability

Form CC-305

Page 1 of 1

OMB Control Number 1250-0005

Expires 04 / 30 / 2026

Voluntary Self-Identification of Disability

Form CC-305 Page 1 of 1 OMB Control Number 1250-0005 Expires 04 / 30 / 2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor's Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov / ofccp .

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your "major life activities." If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to :

Disability Status Select...

PUBLIC BURDEN STATEMENT : According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

J-18808-Ljbffr