Talent.com
Engineer
EngineerCushman & Wakefield • Lebanon, NJ, United States
Engineer

Engineer

Cushman & Wakefield • Lebanon, NJ, United States
30+ days ago
Job type
  • Full-time
Job description

Job Title

Engineer

Job Description Summary

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties

Job Description

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES

  • Perform all plumbing, electrical, or HVAC requirements of the building(s)
  • Maintain heating equipment, chillers (air and / or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
  • Monitor and adjust all mechanical / pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
  • Verify field conditions and perform any necessary repairs or adjustments
  • Monitor Energy Management
  • Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
  • Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
  • Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
  • Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
  • Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
  • Document and report activities to supervisor
  • Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
  • Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
  • Complete all required C&W Safety Training as scheduled annually
  • Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

KEY COMPETENCIES

  • Technical Proficiency
  • Initiative
  • Flexibility
  • Multi-Tasking
  • Sense of Urgency
  • IMPORTANT EDUCATION

  • High School Diploma of GED Equivalent
  • Graduate of apprentice program or trade school preferred
  • IMPORTANT EXPERIENCE

  • 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
  • ADDITIONAL ELIGIBILITY QUALIFICATIONS

  • Appropriate license / permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
  • May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements
  • Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)
  • Basic Computing Skills in Outlook, Excel & Word
  • Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
  • Knowledgeable in energy management systems, techniques and operations.
  • Thorough knowledge in all building systems operations, maintenance and repair.
  • May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority / emergency situations (including overtime type assignments); may require shift work and / or on call duties

    WORK ENVIRONMENT

    This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

    PHYSICAL DEMANDS

    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

  • Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging / lifting devices
  • Regularly required to crouch and reach to install / move equipment by bending forward at the waist or by bending legs and spine
  • Involves movement between departments, floors, and properties to facilitate work
  • Ability to speak clearly so others can understand you
  • Ability to read and understand information presented orally and in writing
  • Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics
  • AAP / EEO STATEMENT

    C&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.

    OTHER DUTIES

    This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

    #INDSkilledTrades

    Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.

    The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications.

    The company will not pay less than minimum wage for this role.

    The compensation for the position is : $31.71 - $37.30

    Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.

    In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com . Please refer to the job title and job location when you contact us.

    INCO : “Cushman & Wakefield”

    Create a job alert for this search

    Engineer • Lebanon, NJ, United States

    Related jobs
    Engineer, Mechanical

    Engineer, Mechanical

    Constellation Energy • Pennsburg, PA, US
    Full-time
    As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose : accelerating the transition to a carbon-free future. We have been the leader in clean ener...Show more
    Last updated: 1 day ago • Promoted
    Engineer

    Engineer

    Curtiss Wright • Bethlehem, PA, US
    Full-time
    You will have obtained a BS in Acoustical Engineering, Mechanical Engineering with an emphasis on acoustics, or other equivalent field of study, and will have a minimum of 2 years' experience i...Show more
    Last updated: 30+ days ago • Promoted
    Quality Engineer

    Quality Engineer

    1014 AD Federal • Alpha, MA, United States
    Permanent
    NASDAQ : ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologie...Show more
    Last updated: 30+ days ago • Promoted
    Manufacturing Engineer - Entry Level, Continuous Improvement

    Manufacturing Engineer - Entry Level, Continuous Improvement

    Howmet • Dover, NJ, United States
    Full-time
    Box 371, Dover, NJ, 07801-0371, US.Remote Work Schedule Availability?.This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to la...Show more
    Last updated: 5 days ago • Promoted
    Staff Engineer

    Staff Engineer

    QuidelOrtho • Raritan, NJ, United States
    Full-time
    QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecula...Show more
    Last updated: 30+ days ago • Promoted
    Digital Design Engineer

    Digital Design Engineer

    1014 AD Federal • Alpha, MA, United States
    Permanent
    NASDAQ : ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologie...Show more
    Last updated: 30+ days ago • Promoted
    Manufacturing Engineer - Continuous Improvement

    Manufacturing Engineer - Continuous Improvement

    Howmet • Dover, NJ, United States
    Full-time +1
    Box 371, Dover, NJ, 07801-0371, US.Remote Work Schedule Availability?.This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to la...Show more
    Last updated: 1 day ago • Promoted
    Global Manufacturing Engineer

    Global Manufacturing Engineer

    Victaulic • Easton, PA, US
    Permanent
    Position : Global Manufacturing Engineer.Location : Victaulic Corporate Headquarters, Easton, PA.Reports to : Manager - Global Manufacturing Engineering. RELOCATION ASSISTANCE IS OFFERED FOR THIS POSIT...Show more
    Last updated: 30+ days ago • Promoted
    EHS Engineer

    EHS Engineer

    Howmet • Dover, NJ, United States
    Full-time +1
    Environmental Health and Safety.Roy Street, Dover, NJ, 07801-4308, US.Remote Work Schedule Availability?.This position entails access to export-controlled items and employment offers are conditione...Show more
    Last updated: 26 days ago • Promoted
    Mechanical Engineer

    Mechanical Engineer

    A-Line Staffing Solutions • Branchburg, NJ, US
    Full-time
    Title : Mechanical Engineer Pay Rate : $24.Location : Branchburg, NJ Note : This is a W2 contract role – 1099, C2C, and 3rd party candidates will NOT be considered Position Responsibilities : Conduct ti...Show more
    Last updated: 12 days ago • Promoted
    Test Engineer

    Test Engineer

    1014 AD Federal • Alpha, MA, United States
    Permanent
    NASDAQ : ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologie...Show more
    Last updated: 30+ days ago • Promoted
    Controls Engineer Critical Power

    Controls Engineer Critical Power

    CPS / Comtech • Allamuchy Township, NJ, US
    Full-time
    Controls Engineer – Critical Power Location : Hackettstown, NJ (or within 1 hour) Compensation : $125,000–$150,000 per year (based on experience) Benefits : Full benefits package + company vehicle (ta...Show more
    Last updated: 4 days ago • Promoted
    Project Engineer

    Project Engineer

    Avantor • Phillipsburg, NJ, United States
    Full-time
    Avantor's operations, directly supporting manufacturing.The Project Engineer will be responsible for managing projects from conception to completion, which involves planning, design, and execution ...Show more
    Last updated: 2 days ago • Promoted
    Senior Structural Engineer

    Senior Structural Engineer

    Jobot • Princeton, NJ, US
    Full-time +1
    This engineering firm is hiring for a senior structural engineer to join their growing team.Full time permanent role in the NJ / NYC area!. This Jobot Job is hosted by : Alex Dickinson.Are you a fit? ...Show more
    Last updated: 30+ days ago • Promoted
    Process Sustaining Engineer, 2nd Shift

    Process Sustaining Engineer, 2nd Shift

    1014 AD Federal • Alpha, MA, United States
    Full-time +1
    NASDAQ : ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologie...Show more
    Last updated: 30+ days ago • Promoted
    Engineer Process Owner- Monoshell

    Engineer Process Owner- Monoshell

    Howmet • Dover, NJ, United States
    Full-time +1
    Roy Street, Dover, NJ, 07801-4308, US.Remote Work Schedule Availability?.This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to...Show more
    Last updated: 2 days ago • Promoted
    Manufacturing Engineer

    Manufacturing Engineer

    1014 AD Federal • Alpha, MA, United States
    Full-time +1
    NASDAQ : ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologie...Show more
    Last updated: 30+ days ago • Promoted
    Engineer, Civil / Structural

    Engineer, Civil / Structural

    Constellation Energy • Harleysville, PA, US
    Full-time
    As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose : accelerating the transition to a carbon-free future. We have been the leader in clean ener...Show more
    Last updated: 16 hours ago • Promoted • New!