Talent.com
Manufacturing Technician Core Borescope 2nd Shift(P)

Manufacturing Technician Core Borescope 2nd Shift(P)

Siemens EnergyGibsonton, FL, US
30+ days ago
Job type
  • Full-time
Job description

Job Description

A Snapshot of Your Day

You will be working with visual inspection of various components utilizing a borescope unit. Operators conduct visual inspection in accordance with component work orders and indication maps. Visual inspection is conducted to inspect difficult to access areas such as internal cavities and areas of concern to ensure component integrity and free from foreign matters. Inspection results are documented, and results determine component disposition this will be in our Gibsonton Florida Location.

How You’ll Make an Impact

  • Utilize a borescope to conduct thorough inspections of internal cavities in cores for defects.
  • Identify and document any defects or irregularities found during inspections.
  • Perform internal work activities, including removing excess ceramic flash from inspected cores and applying patch rework if necessary to ensure quality standards are met.
  • Maintain accurate records of inspections and rework activities.
  • Ensure all equipment, including the borescope, is properly maintained and calibrated.
  • Cross training and other duties may be assigned as needed.

What You Bring

  • Evidence of a completed High School or GED is required.
  • Previous experience in quality inspection or a similar role is preferred.
  • Strong attention to detail, analytical skills and ability to work independently and as part of a team.
  • Knowledge or interest in industrial machinery and ability to read Engineering instructions.
  • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.
  • This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and / or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law.
  • About the Team

    Gas Services

    Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.

    Who is Siemens Energy?

    At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.

    Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.

    Find out how you can make a difference at Siemens Energy :   - energy.com / employeevideo

    Rewards

  • Career growth and development opportunities; supportive work culture
  • Company paid Health and wellness benefits
  • Paid Time Off and paid holidays!
  • 401K savings plan with company match
  • Family building benefits
  • Parental leave
  • Create a job alert for this search

    Manufacturing Technician • Gibsonton, FL, US

    Related jobs
    • Promoted
    Manufacturing Tech I - 2nd Shift

    Manufacturing Tech I - 2nd Shift

    Plasma-Therm LLCSaint Petersburg, FL, US
    Full-time
    This position is for 2nd Shift Only (3 : 00 - 11 : 30PM) • •.Training will start on first shift (7AM - 3 : 30PM) for the first 4-6wks. Facilitates, sets up, build, calibrates, tests and breakdown of plasma ...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Core Blue Light 1st Shift (P)

    Manufacturing Technician Core Blue Light 1st Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will be measuring Cores to ensure dimensional acceptance for mold processing.Participating in training and cross training in production areas. Following work instructions to inspect and produce part...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Core Borescope 3rd Shift(P)

    Manufacturing Technician Core Borescope 3rd Shift(P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    You will be working with visual inspection of various components utilizing a borescope unit.Operators conduct visual inspection in accordance with component work orders and indication maps.Visual i...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Rough Special Process - 1st Shift (P)

    Manufacturing Technician Rough Special Process - 1st Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will be working with core material from the inside of the castings, loading and unloading parts into core removal baskets. Will be flushing parts and monitoring core removal cycle performance using ...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician - Mold Prep - 2nd Shift (P)

    Manufacturing Technician - Mold Prep - 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    As part of the manufacturing process will be weighing, bore scoping, washing, patching, wrapping, and doing inspections of DS molds in our Gibsonton Florida location.How You’ll Make an Impact...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Tech II

    Manufacturing Tech II

    Plasma-Therm LLCSaint Petersburg, FL, US
    Full-time
    Facilitates, sets up, builds, calibrates, tests, and breakdown of plasma processing equipment and records results.NOTE : The Manufacturing Technician II performs all duties of Manufacturing Technici...Show moreLast updated: 30+ days ago
    Manufacturing Tech III

    Manufacturing Tech III

    Plasma-ThermSt. Petersburg, Florida, United States
    Full-time
    Quick Apply
    Facilitates set up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. The Manufacturing Technician III performs all duties of Manufacturing Tec...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Wax Ultrasonic Testing 2nd Shift (P)

    Manufacturing Technician Wax Ultrasonic Testing 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Permanent
    Will be testing wax patterns to ensure dimensional acceptance for mold processing.Participating in training and cross training in production areas. Inspecting and producing parts of exceptional qual...Show moreLast updated: 2 days ago
    • Promoted
    Manufacturing Technician Visual Borescope - 2nd Shift (P)

    Manufacturing Technician Visual Borescope - 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    In this role, you’ll lead by driving manufacturing and repair processes, development, and improvement projects, and collaborating with combustion design and repair engineering groups to innov...Show moreLast updated: 2 days ago
    • Promoted
    Manufacturing Technician V

    Manufacturing Technician V

    Plasma-Therm LLCSaint Petersburg, FL, US
    Full-time
    Sets up, calibrates, and tests plasma processing equipment and records results.Provides technical team leadership to ensure integration and test tasks are completed defect-free and on time, and tha...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Bench 2nd Shift (P)

    Manufacturing Technician Bench 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the G...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician IV

    Manufacturing Technician IV

    Plasma-Therm LLCSaint Petersburg, FL, US
    Full-time
    Sets up, calibrates, and tests plasma processing equipment and records results.Provides technical team leadership to ensure integration and test tasks are completed defect-free and on time, and tha...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician - Rough Special Process 3rd Shift (P)

    Manufacturing Technician - Rough Special Process 3rd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    In this role, you’ll lead by driving manufacturing and repair processes, development, and improvement projects, and collaborating with combustion design and repair engineering groups to innov...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Tech III

    Manufacturing Tech III

    Plasma-Therm LLCSaint Petersburg, FL, US
    Full-time
    Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. NOTE : The Manufacturing Technician III performs all duties of Manufactur...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Technician Wax - Core Prep 2nd Shift (P)

    Manufacturing Technician Wax - Core Prep 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will be working with cores to get them ready for injection in the Gibsonton Florida location.How You’ll Make an Impact.Inspect cores after completion to ensure that the cores have acceptable ...Show moreLast updated: 30+ days ago
    Manufacturing Technician Visual Borescope - 2nd Shift (P)

    Manufacturing Technician Visual Borescope - 2nd Shift (P)

    MediabistroGibsonton, FL, United States
    Full-time
    In this role, you’ll lead by driving manufacturing and repair processes, development, and improvement projects, and collaborating with combustion design and repair engineering groups to innovate ne...Show moreLast updated: 4 days ago
    • Promoted
    Manufacturing Technician Line Maker 2nd Shift (P)

    Manufacturing Technician Line Maker 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    Full-time
    Will be working in the liner manufacturing production according to daily production requirements.Technicians are responsible for the condition and status of all liner inventory ready for molding.Ro...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Tech II

    Manufacturing Tech II

    Hine Automation LLCSaint Petersburg, FL, US
    Full-time
    Facilitate setup, assemble, calibrate and test Electro-mechanical assemblies and systems and correctly record results.Keep a clean and organized work environment per 5S. Facilitates equipment by app...Show moreLast updated: 30+ days ago