Talent.com
Manufacturing Engineer IV

Manufacturing Engineer IV

TSCHuntsville, AL, United States
16 hours ago
Job type
  • Full-time
Job description

Join to apply for the Manufacturing Engineer IV role at TSC

TSC’s Production Division is looking for a Manufacturing Engineer IV , based in Huntsville, AL (Discovery) . This group provides products and services in radar, communication systems, sensors, antennas and other electronics systems to the missile, radar / sensor system, communications, control systems, data acquisition and signal processing markets. The company has developed products ranging from chip-level ASIC to complete turnkey radar and communication systems. TSC has a state‑of‑the‑art hardware capability respected by customers in Government and industry. TSC also provides full‑spectrum systems engineering support including theoretical analysis, requirements generation, interface control, and test planning / execution / data analysis.

Responsibilities

  • Assist in developing and implementing assembly procedures
  • Introduce and train employees on new equipment
  • Assist in leading and adhering to safety, quality, cost, schedule, technical and programmatic requirements, and performance expectations. Conduct process audits and ensure compliance with internal and external quality standards (e.g., IPC, AS9100).
  • Providing shop floor support, developing manufacturing plans, tooling requirements, engineering change implementation and coordinating changes in the build process within an electrical / mechanical manufacturing facility, while mentoring and training junior engineers and technicians.
  • Translate engineering intent, drawings, and configurations into work instructions that produce high‑quality hardware.
  • Apply Design for Manufacturability (DFM) and Design for Assembly (DFA) techniques on both new and existing products to produce optimal design and manufacturing solutions.

Required Qualifications

  • A bachelor’s degree in an engineering equivalent field from an ABET accredited school is required and a minimum of 8 years of relevant experience (master’s degree with minimum of 6 years of relevant experience or PhD with minimum of 3 years of relevant experience).
  • Experience should include military / DoD manufacturing experience, mechanical assemblies and / or circuit card assemblies and integration.
  • Familiar with IPC, J-STD, MIL and DOD Standards, in-depth knowledge, and experience with AS9100 standards and certification processes.
  • Experience in development and implementation of new maintenance programs and creating training programs.
  • US Citizenship due to Operations Security (OPSEC) Requirements and the ability to obtain and maintain a government security clearance.
  • Preferred Qualifications

  • Active DoD secret clearance.
  • Experience with development programs and transition to production.
  • Experience applying audit standards, procedures, and techniques, strongly preferred.
  • Interact across all levels of the organization; efficiently and effectively communicate and implement agreed upon changes; navigate difficult situations and conversations to a productive outcome.
  • Strong analytical skills in root cause analysis, corrective / preventative action determination.
  • Effective communication, teamwork, and leadership abilities. Able to work independently or as part of a team in a fast‑paced environment.
  • Ability to accurately maintain records and documents in accordance with policies and procedures.
  • TSC Benefits

    TSC offers a stable work environment, a competitive salary and a comprehensive benefit package, including ESOP contributions, 401k Matching Program, Flexible Work Schedules, Tuition Reimbursement, Paid Leave and more.

    Applying to TSC

    Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon successful completion of a comprehensive background check, security investigation, and a drug screening.

    EEO Statement

    All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. These regulations prohibit discrimination against qualified individuals and require affirmative action to employ individuals without regard to protected classes.

    Seniority Level

    Mid‑Senior level

    Employment Type

    Full‑time

    Job Function

    Engineering and Information Technology

    Industries

    Defense and Space Manufacturing

    #J-18808-Ljbffr

    Create a job alert for this search

    Engineer Iv • Huntsville, AL, United States

    Related jobs
    Manufacturing Engineer

    Manufacturing Engineer

    DESE Research, Inc.Huntsville, AL, USA
    Full-time
    Quick Apply
    DESE Research is seeking talented and driven Manufacturing Engineers to support a rapidly growing space thruster manufacturing line in Huntsville, AL. These thrusters will play a critical role in sp...Show moreLast updated: 30+ days ago
    Manufacturing Engineer

    Manufacturing Engineer

    Edge AutonomyHuntsville, AL, US
    Full-time
    SALARY RANGE : The anticipated salary range for this role is $91,000 to $115,000 / year.This range reflects a good faith estimate based on the targeted level for the role and typical compensation be...Show moreLast updated: 20 days ago
    Manufacturing Engineer

    Manufacturing Engineer

    Snap OnUSA, Alabama, Elkmont
    Full-time
    People know Snap-on for the quality of our products, but we know that it is the passion and character of our people that make our company a global leader. With our diverse talents and deep pride in ...Show moreLast updated: 10 days ago
    Manufacturing Engineer

    Manufacturing Engineer

    Mueller Water Products, IncUSA, Alabama, Albertville
    Full-time
    Thank you for your interest in Mueller Water Products, Inc.For more than 165 years, Mueller Water Products, Inc.From lifesaving fire protection to data intelligence, we are committed to developing ...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Mechanical Engineer 2nd shift

    Manufacturing Mechanical Engineer 2nd shift

    LeidosHuntsville, AL, US
    Full-time
    Looking for an opportunity to make an impact?.At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success.We ...Show moreLast updated: 30+ days ago
    • Promoted
    Engineer - Manufacturing II • Integration-BE-7 B Shift

    Engineer - Manufacturing II • Integration-BE-7 B Shift

    Blue OriginHuntsville, AL, United States
    Permanent
    Applications will be accepted on an ongoing basis until the requisition is closed.At Blue Origin, we envision millions of people living and working in space for the benefit of Earth.We're working t...Show moreLast updated: 3 days ago
    • Promoted
    Manufacturing Engineer

    Manufacturing Engineer

    Snap-onElkmont, AL, United States
    Full-time
    Snap-on is looking for a highly motivated engineer to create manufacturing equipment and processes for Hand Tool Manufacturing at our Elkmont, Alabama plant. This is an exciting opportunity to contr...Show moreLast updated: 8 days ago
    • Promoted
    Manufacturing Engineer-2nd shift

    Manufacturing Engineer-2nd shift

    LeidosHuntsville, AL, US
    Full-time
    Looking for an opportunity to make an impact?.At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success.We ...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Process Engineer

    Manufacturing Process Engineer

    LeidosHuntsville, AL, US
    Full-time
    Looking for an opportunity to make an impact?.At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success.We ...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Engineer III - (B shift Weeknights)

    Manufacturing Engineer III - (B shift Weeknights)

    Blue OriginHuntsville, AL, United States
    Permanent
    Applications will be accepted on an ongoing basis until the requisition is closed.At Blue Origin, we envision millions of people living and working in space for the benefit of Earth.We're working t...Show moreLast updated: 17 days ago
    • Promoted
    Manufacturing Mechanical Engineer 2nd shift

    Manufacturing Mechanical Engineer 2nd shift

    Leidos IncHuntsville, AL, United States
    Full-time
    Looking for an opportunity to make an impact?.At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success.We empowe...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Controls Engineer

    Manufacturing Controls Engineer

    LeidosHuntsville, AL, US
    Full-time
    Looking for an opportunity to make an impact?.At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success.We ...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Engineer-2nd shift

    Manufacturing Engineer-2nd shift

    Leidos IncHuntsville, AL, United States
    Full-time
    Looking for an opportunity to make an impact?.At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success.We empowe...Show moreLast updated: 30+ days ago
    • Promoted
    Specialist, Composite Manufacturing Engineer

    Specialist, Composite Manufacturing Engineer

    L3 HarrisHuntsville, AL, US
    Full-time
    L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers' mission and qu...Show moreLast updated: 30+ days ago
    • Promoted
    Manufacturing Engineer II - Combustion Devices

    Manufacturing Engineer II - Combustion Devices

    Blue OriginHuntsville, AL, United States
    Permanent
    Applications will be accepted on an ongoing basis until the requisition is closed.At Blue Origin, we envision millions of people living and working in space for the benefit of Earth.We're working t...Show moreLast updated: 23 days ago
    • Promoted
    • New!
    Manufacturing Test Engineer

    Manufacturing Test Engineer

    Leidos IncHuntsville, AL, United States
    Full-time
    Looking for an opportunity to launch your career and make an impact?.At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our custo...Show moreLast updated: 10 hours ago
    • Promoted
    Manufacturing Controls Engineer

    Manufacturing Controls Engineer

    Leidos IncHuntsville, AL, United States
    Full-time
    Looking for an opportunity to make an impact?.At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success.We empowe...Show moreLast updated: 28 days ago
    • Promoted
    Quality Engineer III

    Quality Engineer III

    Blue OriginHuntsville, AL, United States
    Permanent
    Applications will be accepted on an ongoing basis until the requisition is closed.At Blue Origin, we envision millions of people living and working in space for the benefit of Earth.We're working t...Show moreLast updated: 30+ days ago