Talent.com
CNC set- up Machinist night shift
CNC set- up Machinist night shiftAnaheim Precision Manufacturing • Orange, CA, US
CNC set- up Machinist night shift

CNC set- up Machinist night shift

Anaheim Precision Manufacturing • Orange, CA, US
30+ days ago
Job type
  • Full-time
  • Quick Apply
Job description

Job Title :

  • CNC SET UP MACHINIST Department :   MACHINE SHOP Reports To :   MACHINE SHOP MANAGER FLSA Status :   FULL TIME HOURLY Position Summary :   CNC machinist must possess excellent attention to detail and will be responsible to follow out machining of parts in accordance with prints, and Company procedure requirements.

Essential Duties and Responsibilities :

  • To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Create CNC / Lathe and Mill setup sheets
  • Able to setup / operate complex (+ / -.010 or lower, TP <=.024,) CNC machining jobs
  • Perform complex Grind setup’s.
  • Complex GD&T measurement using calipers, height gage, bore gages etc.
  • Advanced shop math
  • Advanced Blueprint reading
  • Understand Geometric Dimensioning and Tolerances.
  • Must own basic inspection equipment (0-6” Caliper).

    • Competencies :

  • To perform the job successfully, an individual should demonstrate the following.
  • Communications  - Exhibits good listening and comprehension.
  • Expresses ideas and thoughts in written form.
  • Expresses ideas and thoughts verbally.
  • Keeps others adequately informed.
  • Selects and uses appropriate communication methods.
  • Customer Service  - Displays courtesy and sensitivity.
  • Manages difficult or emotional customer situations.
  • Meets commitments.
  • Responds promptly to customer needs.
  • Solicits customer feedback to improve service.
  • Dependability  - Commits to doing the best job possible.
  • Follows instruction.
  • Keeps commitments.
  • Meets attendance and punctuality guidelines.
  • Responds to requests for service and assistance.
  • Takes responsibility for own actions.
  • Planning & Organization  - Integrates changes smoothly.
  • Plans for additional resources.
  • Prioritizes and plans work activities.
  • Sets goals and objectives.
  • Uses time efficiently.
  • Works in an organized manner.
  • Quality  - Fosters quality focus in others.
  • Improves processes.
  • Measures key outcomes.
  • Sets clear quality requirements.
  • Solicits and applies customer feedback.
  • Use of Technology  - Adapts to new technologies.
  • Demonstrates required skills.
  • Keeps technical skills up to date.
  • Troubleshoots technological problems.
  • Uses technology to increase productivity.

    • Qualifications :

  • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
  • The requirements listed below are representative of the knowledge, skill, and / or ability required.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    • Education / Experience :

  • High school diploma or general education degree (GED); or one to three months related experience and / or training; or equivalent combination of education and experience. 5 years related experience or training preferred.

    • Language Ability :

  • Read and comprehend simple instructions, short correspondence and memos.
  • Write simple correspondence.
  • Effectively present information in one-on-one and small group situations to customers, clients and other employees.

    • Mathematical Ability :

  • Calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference and volume.

    • Apply concepts of basic algebra and geometry.

    Reasoning Ability :

  • Apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
  • Deal with problems involving a few concrete variables in standardized situations.

    • Computer Skills :

  • Basic Supervisory Responsibilities :   None.

    • Work Environment :

  • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Must be comfortable working in a Manufacturing facility.

    • Physical Demands :

  • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Must be able to lift up to 40 Lbs.
  • Must be able to work in a standing position up to 8 hours per day.
  • The above job description is not intended to be an all-inclusive list of duties and standards of the position.
  • Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

    • Job Type :

  • Full-time Pay : $25.00 - $35,0000 Hr Companies governed by ITAR (International Trade and Arms Regulations) reserve the right to background check / and random drug testing for all applicants Powered by JazzHR
    • Create a job alert for this search

    Cnc Machinist • Orange, CA, US

    Related jobs
    CNC Lathe, Set Up & Operate (ATR)

    CNC Lathe, Set Up & Operate (ATR)

    Tsubaki ATR, LLC • Santa Ana, CA, United States
    Full-time
    The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service.Tsubaki is a leading manufacturer and supplier of power transmission and motion control products.As a ...Show more
    Last updated: 2 days ago • Promoted
    CNC Machinist (2nd Shift)

    CNC Machinist (2nd Shift)

    Impulse Space • Redondo Beach, CA, US
    Full-time +1
    Quick Apply
    This isn't just another job; it’s an opportunity to be part of something epic.Each machined part you create plays a crucial role in our mission to push the boundaries of what’s possible.If you’re r...Show more
    Last updated: 13 days ago
    CNC Machinist III

    CNC Machinist III

    Jobot • Pasadena, CA, US
    Full-time
    Aerospace leader for over 60 years.This Jobot Job is hosted by : Jamal Elkhateib.Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Join a team that pushes t...Show more
    Last updated: 10 days ago • Promoted
    CNC Machinist II

    CNC Machinist II

    RBC Bearings • Baldwin Park, California, United States
    Full-time +1
    Quick Apply
    Machinist II – Baldwin Park, CA.Machinist II is responsible for performing basic machine setups and operating fabrication machinery. ESSENTIAL FUNCTIONS OF THE JOB : .Performs simple setups and ...Show more
    Last updated: 30+ days ago
    CNC Machinist II (2nd Shift)

    CNC Machinist II (2nd Shift)

    RBC Bearings • Baldwin Park, California, United States
    Full-time +1
    Quick Apply
    Machinist II – Baldwin Park, CA.Machinist II is responsible for performing basic machine setups and operating fabrication machinery. ESSENTIAL FUNCTIONS OF THE JOB : .Performs simple setups and ...Show more
    Last updated: 30+ days ago
    CNC Mill Machinist

    CNC Mill Machinist

    Total Aviation Staffing • Huntington Beach, CA, United States
    Permanent
    Take your career to new heights with a leader in.Aerospace Research and Development.In this role, you’ll work on cutting-edge projects that advance aerospace technologies, machining complex contour...Show more
    Last updated: 5 days ago • Promoted
    CNC Machinist - 5 Axis Mill & Lathe (1st and 2nd Shift)

    CNC Machinist - 5 Axis Mill & Lathe (1st and 2nd Shift)

    PCX Aerostructures, LLC • Santa Ana, CA, United States
    Full-time +1
    CNC Machinist - 5 Axis Mill & Lathe (1st and 2nd Shift).PCX Aerosystems is a premier supplier of flight-critical mechanical systems and structures to leading aerospace OEMs and the US Government.Wi...Show more
    Last updated: 12 days ago • Promoted
    ADVD-CNC Machinist

    ADVD-CNC Machinist

    Primary Staffing Source • Costa Mesa, CA, US
    Full-time
    Quick Apply
    Job description The position CNC Saw Operator (Swing Shift) Hours : .Full-time TEMP-HIRE, EXCELLENT BENEFITS AT CONVERSION Job Duties : WE ARE A HIGH PERFORMANCE PLASTICS COMPANY LOOKING FOR A STRONG,...Show more
    Last updated: 30+ days ago
    CNC Machinist / Programmer

    CNC Machinist / Programmer

    Digitran Unit of Electro Switch Corp • Rancho Cucamonga, California, United States
    Full-time
    Quick Apply
    Digitran Unit of Electro Switch Corp.The CNC Machinist is responsible for programming, setting up, and operating CNC equipment - including Haas mills, lathes, and CNC Swiss-type machines - to produ...Show more
    Last updated: 30+ days ago
    CNC Operator and Programmer - Full Time

    CNC Operator and Programmer - Full Time

    Disneyland Resort • ANAHEIM, California, United States
    Full-time
    Individuals assigned to the Machine Shop shall be able to use blueprints, drawings, sketches, or computer-aided design (CAD) and manufacturing files to program by using computer software such as Ma...Show more
    Last updated: 12 hours ago • Promoted • New!
    CNC Machinist I

    CNC Machinist I

    OurStaff, LLC • Santa Ana, CA, us
    Full-time
    Quick Apply
    The CNC Machinist I position contributes to the production of medical devices by operating and performing basic.CNC 2 and 3 Axis machines, with the ability to identify X, Y, Z and 0 coordinates.CNC...Show more
    Last updated: 30+ days ago
    CNC Programmer

    CNC Programmer

    Virco Talent • Santa Fe Springs, California, United States
    Full-time
    Quick Apply
    In this hands-on role, you will program, set up, and operate CNC machines to produce precision components for the aerospace industry. The ideal candidate has a strong background in CNC machining and...Show more
    Last updated: 4 days ago
    CNC MACHINIST (5-AXIS)

    CNC MACHINIST (5-AXIS)

    Freeform • Hawthorne, California, US
    Full-time
    Freeform is revolutionizing manufacturing through.AI-driven, autonomous metal 3D printing factories.DMG Mori and Haas multi-axis machines. D-printed parts for top aerospace, defense, and industrial ...Show more
    Last updated: 8 days ago • Promoted
    CNC Machinist (2nd Shift)

    CNC Machinist (2nd Shift)

    PCC Talent Acquisition Portal • Gardena, California, USA
    Full-time
    With minimal assistance level two machinists operate 2-5 axis CNC / Automated machine cells as well as standalone machines which requires basic machine setup including preparing and setting up fixtur...Show more
    Last updated: 1 day ago • Promoted
    CNC (VTL) Machinist - 1st & 2nd Shift

    CNC (VTL) Machinist - 1st & 2nd Shift

    PCX Aerostructures, LLC • Long Beach, CA, United States
    Full-time +1
    CNC (VTL) Machinist - 1st & 2nd Shift.PCX Aerosystems is a premier supplier of flight-critical mechanical systems and structures to leading aerospace OEMs and the US Government.With roots going bac...Show more
    Last updated: 30+ days ago • Promoted
    CNC Machinist 1 (Weekend 1st shift)

    CNC Machinist 1 (Weekend 1st shift)

    PCC Talent Acquisition Portal • Gardena, California, USA
    Full-time
    Level one production machinists / operators under direct supervision load and unload parts in operation of 3-5 axis CNC mill or lathe machine cells to produce complex machined aerospace parts.Level o...Show more
    Last updated: 4 days ago • Promoted
    CNC Machinist Trainee 1st shift 500am-330pm 23-25hr.

    CNC Machinist Trainee 1st shift 500am-330pm 23-25hr.

    Stanley Black & Decker • Fullerton, California, USA
    Full-time
    CNC Trainee 1st shift Mon-Fri 5 : 00am-3 : 30pm.Eligible for quarterly bonuses.It takes great people to achieve greatness. People with a sense of purpose and integrity.People with a relentless pursuit o...Show more
    Last updated: 3 days ago • Promoted
    CNC Lathe Operator

    CNC Lathe Operator

    Stanley Black & Decker • Fullerton, CA, US
    Full-time
    Quick Apply
    CNC Lathe Operator– 2nd shift Mon-Fri 3 : 30pm-12 : 00am.Pay Range $27-29 for 1st & $30.It takes great people to achieve greatness. People with a sense of purpose and integrity.People with a relentl...Show more
    Last updated: 30+ days ago