CNC Swiss Machinist (Set-Up / Operator)

About the Role

We’re seeking an experienced CNC Swiss Set-Up / Operator to produce tight-tolerance components in a fast-paced, high-mix job-shop environment. You’ll handle daily changeovers, set tooling, verify first-article quality, and keep production running on Swiss-type lathes for aerospace, defense, and commercial customers.

Key Responsibilities

Set up, operate, and troubleshoot CNC Swiss lathes (e.g., Tsugami, Hanwha). Load programs, set offsets, install tooling / collets / guide bushings, and adjust as needed.

Execute frequent changeovers and complete first-article inspections; maintain process capability across small- and large-volume runs.

Read and interpret blueprints and GD&T; hold tight tolerances (down to a few tenths as required).

Perform in-process inspections using micrometers, calipers, pin gauges, height gauges; document results per AS9100 / ISO / ITAR shop practices.

Partner with programming and quality to optimize cycle time, tooling life, and part quality; assist with basic preventative maintenance.

Qualifications

3+ years recent CNC Swiss experience with demonstrated set-up ability (not just operation).

Strong blueprint reading and GD&T; proficient with inspection tools and first-article documentation.

Comfortable working in a certified aerospace / defense environment (AS9100 / ISO 9001; ITAR).

Proven ability to manage multiple changeovers per day and meet production / quality targets.

Pay & Schedule

• Hourly range : $24–$30 / hr DOE. Full-time. Overtime as needed.

Benefits

Nice to Have

Fanuc control familiarity; experience with bar feeders, sub-spindles, live tooling, and high-pressure coolant.

Prior aerospace / defense or medical device machining; SPC knowledge.

Work Location