Machine Operator - Feederbar 1st Shift

Job Description

Job Description

Job Description -

Machine Operator - Feederbar

I. Install : the tooling for the setup

2. The tooling is put in the proper place per the setup sheets

3. Adjust the machine to make good pieces

4. Have~ QC check the parts to ensure the setup is making good pieces

5. Lifting a maximum of 50 lbs 1 to 2 times per week depending on the setup and the number of

setups

6. Stamping for 6 hours a day

7. Manual dexterity for machine adjustments

I. Check pieces to the quality standards and then dump a 4 lb basket

2. Adj4st the machine as required to keep the parts in tolerance

3. Change tooling as needed

4. Computer checks at required on the QC procedure documents

5. Load the machine

6. Maintain the machine in good working order

7. Tumble parts for eliminating burs, and chips as needed

10. Manual dexterity for adjustments and loading of the machine

• Ability to Stand at least 6 hours a day
• Able to do two handed operations including typing, and routine lifting / moving of 35-pound

bars & buckets of parts throughout the whole shift and SO-pounds 1-2 times per week

depending on the setup and the number of setups

(vision within 3 feet must be excellent it see quality issues)

required in written instructions. This includes calipers, micrometers, pitch

micrometers, hardness testers, thread gages, and various specialized hand gages as well

as comparators .

beginning of the paid start time