Talent.com
Atomizer Operator
Atomizer OperatorATI • Monroe, NC, United States
Atomizer Operator

Atomizer Operator

ATI • Monroe, NC, United States
2 days ago
Job type
  • Full-time
Job description

Proven to Perform.

From the edges of space to the bottoms of ocean, our materials are proven to perform and so is our team. We're hiring high performers as proven as our products. Join us.

SUMMARY :

Prepare, maintain and operate the atomizing unit which includes, but is not limited to, the following tasks : preparation of the melt chamber and equipment, charging furnace, ensuring heat chemistries are within specification, preparation of molten metal bath for atomization, operation of the atomizer ensuring that the specified working parameters are followed during pour.

ESSENTIAL TASKS : General Plant :

  • Develop and maintain effective communication to contribute to a team-oriented work environment.
  • Adhere to and participate with company safety programs to ensure a safe work environment.
  • Perform work following all company quality standards and customer specifications to ensure a quality product is being produced including required documentation.
  • Accurate use of shop floor business system (ABS).
  • Maintain all equipment to ensure proper utilization.

Heat Preparation :

  • Weigh out raw materials and revert powder to meet required product chemistry.
  • Fill charge cans to prepare for heat.
  • Prepare heats efficiently and accurately to promote continuous atomization.
  • Refractory :

  • Prepare, maintain, and operate the atomization unit following documented procedures and customer specifications.
  • Perform set up and patch procedures for Tundish, Liner, Nozzle and Filters.
  • Assemble tundish heater.
  • Furnace Turn :

  • Thoroughly clean and assemble all equipment required for melt preparation.
  • Set up plates, tundish heater, nozzle, and O-rings to prepare for furnace turn.
  • Inspect and install all equipment required for melt using cranes and other mobile equipment.
  • Load hoppers with material verifying all chemistry and documentation.
  • Pouring Heat :

  • Verify all equipment and materials are ready for atomization including documentation review.
  • Operate unit to bleed-up of melt chamber to atmosphere and preparation to tap which includes verifying met chemistries are within specification.
  • Operate Atomizer which may include handling powder; atomizer control room is located several flights of stairs above ground level.
  • Furnace Swap :

  • Perform removal and installation of furnace into the melt chamber including dig out, grouting, installing blanket and ground fault.
  • Install the base and liner both pre-fired and ram.
  • Grade Change :

  • Prepare tower for grade change using appropriate technique of blow down, scrape and grind.
  • Clean, replace and / or assemble all filters required for grade change.
  • Clean and assemble the atomizing station.
  • Prepare and install all valves required for grade change.
  • Clean cyclones and piping components in support of grade change.
  • Perform any other assemblies required for melt preparation.
  • NON-ESSENTIAL TASKS :

  • Material handling
  • All other duties as assigned or directed by management.
  • PREFERRED Qualifications :

  • High school diploma or equivalent.
  • Required to pass Respirator Protection screening
  • Previous melt or powder experience preferred
  • 5 years manufacturing experience preferred
  • Able to read, understand, and work to melt procedures, specifications
  • Read and use gauges and controls.
  • Maintain required records and heat reports in a legible manner.
  • Capable of operating industrial controls and mobile equipment.
  • Familiar with basic computer operation.
  • We thrive when the expectations are great, and the barriers are high. We're solving the world's most difficult challenges through materials science. Our advanced, integrated process technologies and proven performers give us a tremendous competitive advantage. When customers systems need to fly higher, dig deeper, stand stronger, and last longer anywhere on, above or below the earth ATI is proven to perform.

  • It is ATI's policy to not provide immigration sponsorship for any of the company's positions.
  • ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

    Create a job alert for this search

    Operator • Monroe, NC, United States

    Related jobs
    Powder Processing Operator

    Powder Processing Operator

    ATI • Monroe, NC, United States
    Full-time
    From the edges of space to the bottoms of ocean, our materials are proven to perform and so is our team.We're hiring high performers as proven as our products. We are currently looking for a Powd...Show more
    Last updated: 7 days ago • Promoted
    Manufacturing Associate

    Manufacturing Associate

    ATI • Monroe, NC, United States
    Full-time
    From the edges of space to the bottoms of ocean, our materials are proven to perform and so is our team.We're hiring high performers as proven as our products. The Manufacturing Associate - Radia...Show more
    Last updated: 30+ days ago • Promoted
    Outside Crane Operator

    Outside Crane Operator

    ATI • Monroe, NC, United States
    Full-time
    From the edges of space to the bottoms of ocean, our materials are proven to perform and so is our team.We're hiring high performers as proven as our products. Operate overhead radio or pendulum ...Show more
    Last updated: 1 day ago • Promoted
    Sonic Inspector

    Sonic Inspector

    ATI • Richburg, SC, United States
    Full-time
    We are currently seeking a Sonic Inspector in the Bar Inspection department at our Monroe, NC facility.As a sonic operator, you will play a valuable role in helping ensure our products and material...Show more
    Last updated: 10 days ago • Promoted
    Coating Operator

    Coating Operator

    Staffmark Group • Concord, NC, United States
    Full-time
    As the seasons are changing, are you ready for a positive change in your career? Well, Staffmark is seeking new talent in Concord, NC ready to join forces with a leading corporation.We are hiring a...Show more
    Last updated: 18 days ago • Promoted
    Fabrication Quality Manager

    Fabrication Quality Manager

    thyssenkrupp Materials NA, Inc. • Richburg, SC, United States
    Full-time
    Company With around 480 locations in over 40 countries, thyssenkrupp Materials Services is the biggest materials distributor and service provider in the western world. The broad service spectrum off...Show more
    Last updated: 15 days ago • Promoted
    Materials Testing Engineer

    Materials Testing Engineer

    ATI • Monroe, NC, United States
    Full-time
    From the edges of space to the bottoms of ocean, our materials are proven to perform and so is our team.We're hiring high performers as proven as our products. This position has technical respons...Show more
    Last updated: 30+ days ago • Promoted
    Production Planner I

    Production Planner I

    ATI • Monroe, NC, United States
    Full-time
    From the edges of space to the bottoms of ocean, our materials are proven to perform and so is our team.We're hiring high performers as proven as our products. The primary purpose of this job is ...Show more
    Last updated: 7 days ago • Promoted
    Quality Specialist (Manufacturing)

    Quality Specialist (Manufacturing)

    ATI • Pageland, SC, United States
    Full-time
    From the edges of space to the bottoms of ocean, our materials are proven to perform and so is our team.We're hiring high performers as proven as our products. Responsible for material dispositio...Show more
    Last updated: 15 days ago • Promoted
    Raw Material Associate

    Raw Material Associate

    ATI • Monroe, NC, United States
    Full-time
    Receive, weigh, and identify raw materials.Can up weighed out heats in correct sequence.Load and unload trucks, verifying load with packing list. Accumulate raw materials for various furnace charges...Show more
    Last updated: 30+ days ago • Promoted
    NC Facility Needs a Locums General Surgeon

    NC Facility Needs a Locums General Surgeon

    HealthEcareers - Client • North Carolina, NC, USA
    Full-time
    Enjoy the locum tenens lifestyle knowing Weatherby is here to support you every step of the way.Call and speak to one of our consultants today for available dates and details.Three blocks : 72-hour ...Show more
    Last updated: 30+ days ago • Promoted
    Sample & Conditioning Operator

    Sample & Conditioning Operator

    ATI • Monroe, NC, United States
    Full-time
    From the edges of space to the bottoms of ocean, our materials are proven to perform and so is our team.We're hiring high performers as proven as our products. We are seeking a Sample and Conditi...Show more
    Last updated: 30+ days ago • Promoted
    Set Up Operator - Assembly - 3rd Shift

    Set Up Operator - Assembly - 3rd Shift

    Schaeffler • Fort Mill, SC, US
    Full-time
    Schaeffler is a dynamic global technology company and its success has been a result of its entrepreneurial spirit and long history of private ownership. As a partner to all of the major automobile m...Show more
    Last updated: 2 days ago • Promoted
    CNC Setup & Operate All Shifts - 3000 Hwy 74 East, Monroe, NC

    CNC Setup & Operate All Shifts - 3000 Hwy 74 East, Monroe, NC

    ASSA ABLOY Americas • Monroe, NC, US
    Full-time
    ASSA ABLOY Creating access for a safer world.The ASSA ABLOY Group provides opening solutions, trusted identities, entrance automation and service for institutional and commercial customers, as w...Show more
    Last updated: 30+ days ago • Promoted
    PH - Switcher PT

    PH - Switcher PT

    FedEx • Concord, North Carolina, US
    Full-time
    Responsible for the movement of trailers to and from the unload / load doors and throughout the yard.May also be responsible for the physical loading, unloading and / or sorting of packages by hand, ...Show more
    Last updated: 6 days ago • Promoted
    Process Controls and Automation Engineer

    Process Controls and Automation Engineer

    ATI • Monroe, NC, United States
    Full-time
    From the edges of space to the bottoms of ocean, our materials are proven to perform and so is our team.We're hiring high performers as proven as our products. As a Process Control and Automation...Show more
    Last updated: 30+ days ago • Promoted
    Maintenance Technician

    Maintenance Technician

    ATI • Richburg, SC, United States
    Full-time
    From the edges of space to the bottoms of ocean, our materials are proven to perform and so is our team.We're hiring high performers as proven as our products. Plan, layout and perform all requir...Show more
    Last updated: 30+ days ago • Promoted
    Seasonal Sanitation Operator, DF - 15-Concord- NC - Comm (Concord, NC)

    Seasonal Sanitation Operator, DF - 15-Concord- NC - Comm (Concord, NC)

    Krispy Kreme Doughnut Corporation • Concord, NC, United States
    Full-time
    Since its founding in 1937, Krispy Kreme's focus has remained the same - making fresh doughnuts using our founder's original recipe. The brand's iconic Hot Light lets consumers know when doughnuts a...Show more
    Last updated: 10 days ago • Promoted