Talent.com
Quality Inspector II
Quality Inspector IIAustal USA • Mobile, AL, US
Quality Inspector II

Quality Inspector II

Austal USA • Mobile, AL, US
30+ days ago
Job type
  • Full-time
Job description

Job Description

REPORTS TO : Quality Inspection Supervisor or Quality Inspection Foreman

SUPERVISES : Not applicable

DUTIES / RESPONSIBILITIES :

\n

  • Performs in-process quality assessments during vessel construction, including compliance audits prior to external surveys, utilizing Visual Testing (VT), Liquid Penetrant Testing (PT), Magnetic Particle Testing (MT), or other non- destructive testing (NDT) inspection methods.

\n

  • Consults with Class Surveyors and / or Customer Representatives during external inspections as necessary.
  • \n

  • Provides guidance to production employees and Supervision for workmanship corrections required.
  • \n

  • Shall document, accept or reject workmanship based upon contract acceptance criteria for surface and subsurface inspections.
  • \n

  • Provides mentoring and on-the-job-training (OJT) for NDT certification of other Inspectors.
  • \n

  • Implements and maintains vessel-specific inspection plans and requirements per applicable contract requirements, or as assigned.
  • \n

  • May be assigned auditing of the Quality Management System in accordance with ISO 9001 : 2015.
  • \n

  • May stand in as Step-Up-Supervisor as needed.
  • \n

  • May be required to support domestic travel to support company need.
  • \n

  • Must be willing to work any shift.
  • \n

  • Complies with Austal's employee handbook general guidelines, company procedures and policies.
  • \n

  • This position description is not intended to be all-inclusive. Incumbents will perform other tasks as assigned.
  • \n \n

    QUALIFICATIONS / KNOWLEDGE / EXPERIENCE :

    \n

  • High school diploma / GED required.
  • \n

  • Required minimum of one (1) years of experience as a Quality Inspector I at Austal USA for internal candidates.
  • \n

  • Three (3) years total NDT Level II experience with a minimum of one (1) year of experience in VT, PT and MT in a related field or three (3) years as a VT Certified Welding Inspector (CWI) for external candidates.
  • \n

  • Level II certification in Visual Testing (VT), Liquid Penetrant Testing (PT), Magnetic Particle Testing (MT) methods required.
  • \n

  • Other NDT experience is a plus and will be considered equivalent for preferred applicants.
  • \n

  • Working knowledge of NDT standards including, but not limited to ASNT SNT- TC-1A, MIL-STD-271, MIL-STD-1689, MIL-STD-2035, MIL-STD-22D, MIL-STD-278, MIL-STD-248, ABS-NVR Part 8 and / or corresponding AWS, ANSI, ASTM documents a plus.
  • \n

  • Willingness and ability to learn any new NDT methods and / or skills assigned by management.
  • \n

  • All company provided training shall be based on company needs at the company's discretion.
  • \n

  • Willingness and ability to increase understanding of the applicable standards and requirements for the job.
  • \n

  • Leadership abilities with an excellent team-spirited attitude.
  • \n

  • Demonstrated ability to read and comprehend construction drawings, schematics and technical manuals.
  • \n

  • Proven ability to perform simple math (add, subtract, multiply and divide) and measure using the metric system.
  • \n

  • Basic knowledge of Trigonometry and Geometry functions are a plus.
  • \n

  • Basic knowledge of shipyard practices and operational principles of the shipbuilding process.
  • \n

  • Strong understanding of quality principles required.
  • \n

  • Work autonomously with minimal direction or management support.
  • \n

  • Ability and willingness to work irregular or extended work schedule as required.
  • \n

  • Ability to work independently, prioritize tasks, work under pressure and be self- motivated.
  • \n

  • Basic computer skills utilizing Microsoft Word, Excel, Outlook, PowerPoint, and Access a plus.
  • \n

  • Strong organizational skills.
  • \n

  • Excellent oral and written communication skills.
  • \n

  • Selected candidates must provide documentation to support certifications / experience prior to interview and / or hire. May be waived at hiring Manager's discretion based on testing and interviewing scores and company needs.
  • \n

  • Selected candidates shall complete written and practical exams prior to interview and / or hire.
  • \n

  • Selected candidates must score 80% or better on written exam and demonstrate advanced competence in practical demonstrations to be considered for hire.
  • \n \n

    TOOLS : Familiar with use and function of basic power and hand tools.

    ADDITIONAL GUIDELINES :

    Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA :

    \n

  • 18 years of age or older at time of application
  • \n

  • Able to provide proof of US Person Status
  • \n

  • No felony convictions of Theft / Deception or Violent crimes within seven years from disposition date
  • \n

  • No felony convictions of Drug crimes within three years from disposition date
  • \n

  • Willing to submit to a drug screen
  • \n

  • Willing to submit to a background check
  • \n

  • High School Diploma / GED or comparable trade experience with comparable trade experience defined as five (5) or more years of experience working in the applicable trade, two (2) years of experience in shipbuilding, or, education in the trade comparable to apprenticeship.
  • \n \n

    PHYSICAL REQUIREMENTS :

    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites.

    While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit.

    Specific physical requirements include the following :

    1. Must have the ability to bend, squat, stoop, crawl, and kneel.

    2. Perform prolonged standing.

    3. Ability to turn head from side to side and about the vertical axis.

    4. Ability to turn body at the waist from side to side and about the vertical axis.

    5. Lift / push / pull 50lbs to 75lbs on an occasional basis.

    6. Lift / push / pull up to 20lbs on a frequent basis.

    7. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).

    8. Ability to work at heights above 12' while working from ladders, scaffolding and / or man lifts.

    9. Able to work at a variety of levels (ex. waist, eye, overhead).

    10. Demonstrate the ability to safely and appropriately use required tools and equipment.

    11. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.

    12. Possess sufficient handgrip and coordination to carry and operate tools and equipment.

    13. Ability to utilize personal protective equipment (hard hat, safety glasses, steel- toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.

    14. Ability to withstand cold and hot temperatures.

    15. Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time.

    16. Able to respond to verbal and audible sounds / commands.

    17. Able to utilize adequate visual skills.

    18. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.

    19. Ability to perceive attributes of an object / material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

    WORK ENVIRONMENT

    The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and / or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB.

    SAFETY

    Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.

    Equal Employment Commitment

    Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance : 251-445-1932.

    Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

    Create a job alert for this search

    Quality Inspector Ii • Mobile, AL, US

    Related jobs
    Inspection Technician

    Inspection Technician

    VirtualVocations • Mobile, Alabama, United States
    Full-time
    A company is looking for an Inspection Technician I.Key Responsibilities Inspect purchased parts, assemblies, hardware, and materials for conformance to specifications Examine items for defects ...Show more
    Last updated: 4 days ago • Promoted
    Inspector

    Inspector

    Segers Aero Corporation • Fairhope, AL, US
    Permanent
    Segers Aero Corporation located in Fairhope, AL is seeking an Inspector to join our team.We offer a competitive benefits package and a 9 / 80 work schedule that includes every other Friday off.Do you...Show more
    Last updated: 30+ days ago • Promoted
    Certified Welding Inspector (CWI)

    Certified Welding Inspector (CWI)

    ECS Southeast, LLP • Mobile, AL, United States
    Full-time
    ECS Limited is offering a unique opportunity for a talented Specialty Technician I to join our Mobile team and advance in a dynamic work environment. You'll work on a variety of projects performing ...Show more
    Last updated: 30+ days ago • Promoted
    Quality Inspector

    Quality Inspector

    AAA USA Inc • Mobile, AL, US
    Full-time
    This role requires conducting inspections on precision electromechanical assemblies, subassemblies, and composite products. The ideal candidate will have experience in aerospace or a related industr...Show more
    Last updated: 30+ days ago • Promoted
    Quality Control Inspectors

    Quality Control Inspectors

    OSP Inspectors Inc • Gulf Shores, AL, US
    Full-time +1
    We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team.This role involves walking residential construction sites to ensure all work meets established quali...Show more
    Last updated: 30+ days ago • Promoted
    Mechanical Quality Inspector

    Mechanical Quality Inspector

    Express Employment - Skilled Trades (AL) • Mobile, AL, US
    Full-time
    Perform technical inspections throughout the aircraft production process to ensure compliance with design, customer, and certification requirements. Conduct visual, incoming, first article, and fina...Show more
    Last updated: 1 day ago • Promoted
    Aircraft Quality Inspector - SEGULA TECHNOLOGIES

    Aircraft Quality Inspector - SEGULA TECHNOLOGIES

    AEROCONTACT • Mobile, AL, US
    Full-time
    Aircraft Quality Inspector - SEGULA TECHNOLOGIES.Be among the first 25 applicants.Our Aerospace Manufacturing Client is looking for a Mechanical Inspector to join their Manufacturing department bas...Show more
    Last updated: 2 days ago • Promoted
    Quality Engineer III

    Quality Engineer III

    VirtualVocations • Mobile, Alabama, United States
    Full-time
    A company is looking for a Quality Engineer III.Key Responsibilities Develop and execute software quality methods and processes Lead projects and mentor less experienced team members in quality ...Show more
    Last updated: 18 days ago • Promoted
    Quality Technician

    Quality Technician

    VirtualVocations • Mobile, Alabama, United States
    Full-time
    A company is looking for a Quality Technician IV located in Chicago, IL.Key Responsibilities Conduct audits, inspections, and testing of Quality System Programs and respond to food safety and qua...Show more
    Last updated: 3 days ago • Promoted
    Quality Engineer

    Quality Engineer

    VirtualVocations • Mobile, Alabama, United States
    Full-time
    A company is looking for a Staff Development Quality Engineer in New Port Richey, FL.Key Responsibilities Perform audits, inspections, tests, defect analysis, and trend analysis to assure quality...Show more
    Last updated: 30+ days ago • Promoted
    Mechanical Quality Inspector

    Mechanical Quality Inspector

    Express Employment Professionals - Alabama • Mobile, AL, US
    Full-time
    Perform technical inspections throughout the aircraft production process to ensure compliance with design, customer, and certification requirements. Conduct visual, incoming, first article, and fina...Show more
    Last updated: 1 day ago • Promoted
    Level 1, Level 2, and Sr. CEI Inspector

    Level 1, Level 2, and Sr. CEI Inspector

    Volkert Inc • Gulf Shores, AL, US
    Full-time
    Are we the road to your future?.We are currently searching for talented.ALDOT certifications to support our East Gulf Region. Inspection for compliance with contract documents, standards, and specif...Show more
    Last updated: 30+ days ago • Promoted
    Quality Control Inspector

    Quality Control Inspector

    AAA USA Inc • Mobile, AL, US
    Full-time
    We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet t...Show more
    Last updated: 30+ days ago • Promoted
    CEI Inspector

    CEI Inspector

    Thompson Engineering • Mobile, AL, US
    Full-time
    Thompson Engineering is looking for a CEI Inspector in the Mobile, AL area.CEI Inspectors follow standard procedures in documenting construction projects and inspecting job activities to verify the...Show more
    Last updated: 30+ days ago • Promoted
    Quality Inspector Second Shift

    Quality Inspector Second Shift

    Sparks Group • Mobile, AL, US
    Full-time
    Sparks Group has partnered with a leading aviation manufacturer seeking a Quality Inspector for a second shift role.If you have 3+ years of experience as a quality inspector with an aviation compan...Show more
    Last updated: 6 days ago • Promoted
    Certified API Inspector

    Certified API Inspector

    Challenge Testing • Mobile, AL, US
    Full-time
    Show more
    Last updated: 30+ days ago • Promoted
    Aircraft Quality Inspector

    Aircraft Quality Inspector

    Segula Technologies • Mobile, AL, US
    Full-time
    Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the produc...Show more
    Last updated: 30+ days ago • Promoted
    Aircraft Quality Inspector

    Aircraft Quality Inspector

    Airbus Americas • Mobile, AL, US
    Permanent
    Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your applicatio...Show more
    Last updated: 2 days ago • Promoted