Instrumentation, Controls and Electrical (IC&E) / O&M Technician

Instrumentation, Controls and Electrical (IC&E) / O&M Technician

The Syracuse Combined Cycle Plant in Solvay, NY, is a 103 MW facility with a Siemens V64.3 combustion turbine, a Deltak three-drum HRSG, and an Ansaldo steam turbine. This role may also support the Beaver Falls facility, a 107 MW 1x1 combined-cycle dual-fuel cogeneration plant supplying steam to two paper mills. Beaver Falls features a Siemens V64.3 turbine, an Ansaldo steam turbine, a Deltak HRSG, and a Tempella auxiliary boiler. Both plants play a key role in the regional energy landscape, ensuring reliable power and supporting New York's industrial operations.

Opportunity Summary

The Instrumentation, Controls, & Electrical (IC&E) / O&M Technician is responsible for monitoring the status of all plant systems on a continuous basis. Responds to alarms by taking appropriate corrective actions and executes plant shutdown and start-up procedures as required. Ensures that the plant meets its generating requirements while operating in a safe and efficient manner. This role also involves troubleshooting, calibrating, and repairing instrumentation, DCS, and PLC systems, supporting planned outages, emergency repairs, and routine maintenance tasks under supervisory guidance. Additionally, the technician will participate in plant operations, and assist with administrative duties to ensure the smooth and safe operation of the facility.

Your scope of responsibility as IC&E / O&M Technician includes the following primary functions :

• Perform instrumentation and control (I&C) activities to support planned outages, emergency repairs, and other maintenance tasks to ensure plant systems operate efficiently, reliably, and safely.
• Troubleshoot, calibrate, and repair power plant instrumentation, Distributed Control Systems (DCS), and Programmable Logic Controllers (PLC).
• Maintain Continuous Emissions Monitoring System (CEMS) equipment in accordance with regulatory requirements.
• Conduct routine water chemistry analysis and operate Continuous Emissions Monitoring (CEM) equipment.
• Follow established preventive and predictive maintenance plans, including testing and operating control equipment and systems.
• Operate major auxiliary equipment, including air compressors, boiler feedwater and condensate systems, water treatment systems, and locally controlled electrical and mechanical equipment.
• Execute operational orders from the Control Room Operator (CRO) for starting, securing, or preparing equipment for service in accordance with operating instructions and procedures.
• Assist the CRO with start-up, shutdown, and normal operations of power plant systems.
• Perform inspections, make minor repairs, and adjust equipment to maintain proper operating conditions.
• Maintain plant DC emergency battery backup systems.
• Collect and log plant operating data.
• Report any abnormal or irregular conditions that develop during operations and take corrective action within the scope of operating instructions.
• Participate in root cause analysis of abnormal conditions, alarms, and equipment trips.
• Ensure all equipment repairs or modifications comply with manufacturer guidelines.
• Thoroughly understand and follow all plant safety policies and procedures.
• Adhere to Environmental, NERC, and other regulatory compliance codes and regulations.
• Maintain accurate records of plant maintenance work using the Computerized Maintenance Management System (CMMS).
• Support special projects and tasks as assigned by the Plant Manager.

NAES Safe

Safety is a core value at NAES, and as a condition of employment, all employees are expected to remain mentally alert and work safely at all times. Employees must also adhere to all safety warnings and posted signs while on company property. Additionally, they are required to follow all NAES safety rules and procedures. Adherence to these safety responsibilities is one of the key factors in the evaluation of each employee's performance.

Working Relationships

The IC&E / O&M Technician reports to the Plant Manager. This position will also coordinate with all other plant personnel in the safe and efficient daily operation of the plant.

Physical Requirements and Working Conditions

Physical requirements include standing for extended periods of time, climbing stairs and ladders, working from elevated platforms and walkways at varying heights, and routinely lifting up to 50 pounds.

Power plant environment that may involve entering confined spaces, crawling through narrow areas, and handling hazardous materials, with exposure to fumes, extreme temperatures, and noise. Work may include high heat near equipment and varying outdoor weather conditions.

Some duties may require the use of protective equipment, which can include hard hats, safety glasses, and eye protection, air masks / respirators, ear protection, chemical suits, flame-resistant clothing (FRC), hot gloves, high-voltage protective gear, and fall protection. Fit testing for respirators may be required. Strict smoking restrictions apply in and around the facility.

Fitness for Duty

All personnel will participate in the Fitness for Duty Program, which includes a post-offer physical examination, drug screening, and post-employment random drug screening.

Work Schedule

The IC&E / O&M Technician works a standard Monday to Friday day shift schedule, ensuring consistent plant operation and support during regular business hours. This position will also occasionally necessitate extended working hours and flexible shifts as needed, including weekends and holidays, in response to schedules, workload demands, and plant conditions. Periodic callouts or "On call" status will also be required.

Some travel may be required as needed in support of the Beaver Falls Generation Facility.

Compensation

This position offers a base pay rate ranging from $44.29 to $50.21 per hour, along with an annual performance bonus.

Core Qualifications and Skills

We are seeking a qualified Instrumentation, Controls, and Electrical (IC&E) Technician with hands-on experience in power generation operations and maintenance. The ideal candidate demonstrates strong technical aptitude, a commitment to safety, and a track record of contributing effectively within a team environment to support reliable plant performance.

About NAES

NAES Corporation is a leading provider of operations, maintenance, and engineering services for energy facilities. We have built a reputation as a reliable partner for clients in North America and internationally, offering services across the power generation, oil and gas, and renewable energy sectors. Our growing family of companies allows us to address the entire life cycle of power generation and other industrial plants.

NAES is committed to fostering a diverse and inclusive workplace. We prioritize selecting employees based on merit and competence, seeking individuals of the highest quality, without regard to race, color, religion, national origin, gender, gender identity, sexual orientation, age, disability, military status, or affiliation protected under USERRA, or any other form of discrimination prohibited by applicable local, state, and federal law.