Talent.com
Outside Machinist Improver- 1402

Outside Machinist Improver- 1402

LaborOne StaffingNational City, California, United States
30+ days ago
Job type
  • Full-time
  • Quick Apply
Job description

Labor One is hiring Outside Machinist Improvers for a project in San Diego, California.

Shipyard experience is required.

Please contact our team for more information!

Cell : (619)484-7267 ; (619)657-5507 or (858)717-1672

  • Please send us a text if we don't answer

Walk-ins Accepted! Apply today!

1625 Hoover Avenue National City, CA 91950

Office Hours : 8 : 00 AM-5 : 00 PM

General Information

Job Description :

This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to : Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard.

QUALIFICATIONS AND EXPERIENCE

  • Must be able to comprehend instructions, drawings, and general correspondence.
  • Must have basic print (drawing) reading and interpretation skills.
  • Must have a working understanding of ship repair terminology and ship compartment location nomenclature.
  • Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.)
  • Must be able to write reports describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action.
  • Must be able to work from Process Control Procedures (PCP).
  • Must be able to use precision measurement tools.
  • Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers.
  • Must have a basic understanding of drawings, sketches, tech manuals, and user manuals.
  • Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks.
  • Must have a comprehensive understanding of Lock-out / Tag-out procedures.
  • Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work.
  • Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system.
  • Three (3) years of machinist experience, preferably one (1) of which is in the maritime environment.

    • DUTIES AND RESPONSIBILITIES

  • Comply with OSHA standards and the shipyards best safety practices.
  • Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor.
  • Work shifts and overtime as assigned.
  • Keep the work area clean and safe at all times, especially at the end of the shift.
  • Complete work assignments as scheduled and provide status of unfinished work for shift turnover.
  • Assist with the preparation of Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor.
  • Comply with the Company’s “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment.
  • Receive technical guidance and carry out directions from a Journeyman or Supervisor.
  • Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner.

    • Work Tasks Include :

  • Prepare a safe work area especially as it relates to fire prevention.
  • Assist in the coordinate work with other crafts to disconnect and remove equipment.
  • Compile as-found reports identifying the status of equipment prior to work.
  • Assist with in-place valve repairs.
  • Assist with material take offs with adequate information for ordering.
  • Assist with equipment alignment.
  • Assist with operational tests.
  • Keep blanking logs up to date.
  • Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards.
  • Assist with Lock-out Tag-out activities for work being performed.

    • WORK ENVIRONMENT

  • The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present.
  • There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements.
  • Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms.
  • The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory.
  • There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn.

    • PHYSICAL DEMANDS :

    The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks.

    While performing the duties of this position the employee is regularly required to : stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit.

    SPECIFIC PHYSICAL REQUIREMENTS :

  • Candidates may be required to demonstrate any or all requirements.
  • Lift / push / pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day).
  • Lift / push / pull up to 20 lbs on a frequent basis (34-66% of the day).
  • Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel.
  • Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps).
  • Work at a variety of levels and positions (ex. Waist, eye, above head).
  • Good balance while working on uneven surfaces and maneuvering obstacles.
  • Sufficient handgrip and coordination to carry and operate tools and equipment.
  • Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day).
  • Respond to visual, verbal, and audible sounds / commands.
  • Work at heights above 12’ from ladders, scaffolding, and manlifts.
  • Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
  • Perceive attributes of an object / material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
  • Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis.

    • 1st Shift

    40 hours a week. Overtime with Supervisors approval.

    Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

    About LaborOne Staffing :

    We're always hiring Great people for our projects. We have work available for Skilled Craft - Welders, Fitters, Electricians, Machinists, Blaster Painters, Fire Watch General Labor, Etc. in Shipyards on both coasts and along the Gulf Coast region.We also have General Labor jobs available in Texas, Florida, South Carolina, Virginia and California.

    Create a job alert for this search

    Outside Machinist • National City, California, United States

    Related jobs
    • Promoted
    Machinist - Earn Up to $37 / hr

    Machinist - Earn Up to $37 / hr

    TradeJobsWorkforce92134 San Diego, CA, US
    Full-time
    As a Machinist Trainee, you will be responsible for working within the framework of a team and performing the following activities : Learn the required skills to work within the Pilot Metals Develop...Show moreLast updated: 30+ days ago
    Outside Machinist

    Outside Machinist

    Craft & Technical SolutionsSan Diego, CA, US
    Full-time
    Quick Apply
    Marine and Industrial Staffing Company with offices all over the country.We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of...Show moreLast updated: 30+ days ago
    Outside Machinist / Mechanical Department Head

    Outside Machinist / Mechanical Department Head

    Standard Inspection ServicesNational City, CA, USA
    Full-time
    Quick Apply
    General Manager Salary Status : Hourly / Non-Exempt.Leads Outside Machinist Team, oversees machining operations, ensures quality and safety standards, and manages departmental budgets, while also tr...Show moreLast updated: 30+ days ago
    • Promoted
    • New!
    Computer Numerical Control Machinist

    Computer Numerical Control Machinist

    Midland-Marvel Recruiters, LLCSan Marcos, CA, United States
    Full-time
    Growing manufacturer in the San Diego, CA metro area has an excellent opportunity available for a Lead Senior CNC Programmer / Machinist. The position will be involved in programming mills using Mas...Show moreLast updated: 2 hours ago
    • Promoted
    Hiring Now - Work from Home - No Experience

    Hiring Now - Work from Home - No Experience

    OCPASan Diego Country Estates, California, us
    Remote
    Part-time +1
    Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of bet...Show moreLast updated: 30+ days ago
    • Promoted
    Dentist - Job Location : Australia or New Zealand - Relocation Bonus

    Dentist - Job Location : Australia or New Zealand - Relocation Bonus

    Abano USACoronado, CA, USA
    Permanent
    Your key responsibilities include : .Maintaining accurate patient records and adhering to .Australian dental regulations and best practices. Flexibility : While we try hard not to change plans, sometim...Show moreLast updated: 30+ days ago
    Outside Machinist

    Outside Machinist

    LaborOne StaffingNational City, California, United States
    Full-time
    Quick Apply
    Please contact our team for more information!.Cell : (619)657-5507 or (858)717-1672 •text if we are unable to answer your call •. Hoover Avenue National City, CA 91950.Installs, maintains, and repairs...Show moreLast updated: 30+ days ago
    Sr. Machinist

    Sr. Machinist

    Means Engineering, Inc.Carlsbad, CA, US
    Permanent
    Quick Apply
    Sign-on Bonus • • • • • If you're a multifaceted Machinist with advanced machining skills and proven expertise in setup, problem-solving, and troubleshooting — we want to talk to you.Join the Tea...Show moreLast updated: 30+ days ago
    • Promoted
    Work From Home Product Tester – $25-$45 / hr – No Experience Needed

    Work From Home Product Tester – $25-$45 / hr – No Experience Needed

    OCPAJulian, California, us
    Remote
    Part-time +1
    Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of bet...Show moreLast updated: 30+ days ago
    • Promoted
    Outside Machinist Journeyman Diesel Mechanic

    Outside Machinist Journeyman Diesel Mechanic

    PROPULSION CONTROLS ENGINEERING LLCSan Diego, CA, US
    Full-time
    OUR CORE PILLARS : Safety | Operational Excellence | Shareholder Value.Propulsion Controls Engineering has a job opening for an. Outside Machinist Journeyman Diesel Mechanic.PCE is a full service ele...Show moreLast updated: 14 days ago
    • Promoted
    Outside Machinist II

    Outside Machinist II

    Epsilon SystemsSan Diego, CA, US
    Full-time
    Epsilon Systems Solutions, Inc.Outside Machinist II in San Diego, CA.This exciting position offers the chance to play a vital role in supporting US Navy operations in beautiful San Diego! As a subj...Show moreLast updated: 18 days ago
    • Promoted
    Make up to $85k as Surrogate!!!!

    Make up to $85k as Surrogate!!!!

    Surrogacy4AllAlpine, CA, US
    Full-time
    We are currently hiring Surrogate Mothers throughout the USA and Canada to join our team.No waiting! You can start today!. Surrogacy4All founded in 2006, is a professional, friendly, surrogate-focus...Show moreLast updated: 12 days ago
    • Promoted
    Multiskilled Radiology Technologist - Imaging CAT Scan

    Multiskilled Radiology Technologist - Imaging CAT Scan

    CHRISTUS HealthSan Marcos, CA, United States
    Full-time
    Job Description Description Summary : With minimum supervision, the Multi-Modality Technologist will competently function in two (2) or more modalities within the Imaging Department.This can include...Show moreLast updated: 30+ days ago
    • Promoted
    Optometrist- w / Production Bonus

    Optometrist- w / Production Bonus

    Acuity Eye GroupEscondido, CA, United States
    Permanent
    The Optometrist is responsible for examining the eyes and other parts of the visual system.They also diagnose and treat visual problems and manage diseases, injuries, and other disorders of the eye...Show moreLast updated: 30+ days ago
    • Promoted
    Test Products from Home – $25-$45 / hr + Freebies

    Test Products from Home – $25-$45 / hr + Freebies

    OCPAAlpine, California, us
    Part-time +1
    Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of bet...Show moreLast updated: 30+ days ago
    • Promoted
    Machinist

    Machinist

    TradeJobsWorkForce92127 San Diego, CA, US
    Full-time
    Machinist Job Duties : Review samples, drawings or instructions to understand specif...Show moreLast updated: 30+ days ago
    • Promoted
    Machinist

    Machinist

    TradeJobsWorkforce92138 San Diego, CA, US
    Full-time
    As a Machinist Trainee, you will be responsible for working within the framework of a team and performing the following activities : Learn the required skills to work within the Pilot Metals Develop...Show moreLast updated: 30+ days ago
    • Promoted
    Senior Tooling Manager

    Senior Tooling Manager

    Hunter IndustriesSan Marcos, CA, United States
    Full-time
    Tool Room Group in areas including new mold and component construction, lifecycle asset management, and machining.This role drives long-term business objectives by clearly defining goals through da...Show moreLast updated: 1 day ago