Talent.com
Veolia
Maintenance Technician IVeolia • New Bedford, États-Unis
Maintenance Technician I

Maintenance Technician I

Veolia • New Bedford, États-Unis
30+ days ago
Salary
$26.95 hourly
Job type
  • Full-time
Job description

Maintenance Technician I

Company Description

A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent.

Please visit our website for more information - www.veolianorthamerica.com

Job Description

Pay Rate: $26.95 per hour.

Position Purpose:

Performs maintenance services, installation or repairs in one or more skill areas such as plumbing, mechanical, electrical repairs, pneumatic, hydraulic, installation, carpentry, painting or vehicle servicing.

Primary Duties/Responsibilities:

  • Performs routine and preventative maintenance, lubrication and minor adjustments on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed and odor control, disinfection equipment, vacuum filters and belt presses. Promptly reports any operational problems with machines or equipment to Lead or Supervisor.
  • Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating conditions are restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation.
  • Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint.
  • May perform manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles for plant operational purposes.
  • Learns to estimate time and material costs for various projects. May assist in other areas of plant as directed.

Work Environment:

  • Spends 100% of the time in the operations environment.
  • Typically spends 25 – 35% of time exposed to outdoor and sometimes inclement weather.
  • Company service vehicles are used as required.
  • Travels 1 – 2 times per year for company provided training.
  • May serve rotational 24-hour emergency on-call.
  • Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.

Qualifications

Education/Experience/Background:

  • High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.
  • Six months to two years of experience in a related position with ability to comprehend specifications, blueprints and manuals.

Knowledge/Skills/Abilities:

  • Ability to perform basic mathematical calculations.
  • Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.
  • Experience using power, pneumatic, hydraulic, and hand tools and shop tools such as drill press, band saw, bench grinder, and torque wrench preferred.
  • Experience using material handling equipment, pressure gauges and precision measuring instruments.
  • Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.
  • Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.
  • Ability to communicate work status and related issues and needs to supervisors / management.

Required Certification/Licenses/Training:

  • Must possess a valid driver’s license and a safe driving record.
  • Employee Orientation, Departmental Operating Procedures, Safety, Confined Space training, OSHA and Quality Training.
  • Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), gas detectors, confined space equipment, etc.)
  • Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems.
  • Obtain or maintain HVAC, Electrician, Plumber’s or other trade License if assigned to that area. Note: Tech will not perform duties unless properly licensed.
  • Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications.

Physical Requirements:

  • Amount of time spent – Standing 25%, Walking 75% for as many as five miles per shift.
  • Requires close visual and hearing observation to detect non-conformance and machine malfunction.
  • Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms.
  • Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds.
  • Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet.
  • Occasional stooping, bending or kneeling and entering confined spaces.

Additional Information

Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.

We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Postuler
Create a job alert for this search

Maintenance Technician I • New Bedford, États-Unis

Similar jobs

Molding Technician

D.W. Clark, Inc. – Taunton, MAEast Bridgewater, MA, United States
Full-time

Clark casts critical components for the infrastructure and defense of our nation.We are seeking a detail-oriented and reliable Molding Technician to join our production team.In this role, you will ... Show more

 • Promoted

Field Service Technician - Material Handling Equipment - Fall River, MA

Abel WomackEast Freetown, MA, United States
Full-time

Field Service Technician - Material Handling Equipment Fall River, MA and surrounding area$23-$36 per hour Where problem-solvers become the hero Abel Womack is seeking skilled and motivated Field S... Show more

 • Promoted

General Laborer for Boatyard

Breakwater MarinasFairhaven, MA, United States
Full-time

Breakwater Marinas located in Fairhaven, MA.We are looking for experienced yard crew to assist in daily routines such as hauling and launching, painting, buffing, general maintenance, etc.Full time... Show more

 • Promoted

Maintenance Technician - Manufacturing

EdgeStone StaffingBrockton, MA, United States
Full-time

Machine Maintenance Technician - Custom Plastic Extrusion Edgestone Staffing is partnering with a well-established custom plastic extrusion company known for its strong team culture, clean facility... Show more

 • Promoted

Packaging Technician II - 2nd Shift

ManpowerFall River, MA, United States
Full-time

Our client, a leading organization in the manufacturing and packaging industry, is seeking a dedicated Packaging Technician II to join their team.As a Packaging Technician II, you will be part of t... Show more

 • Promoted

Residential/General Maintenance

ABLE AssociatesNew Bedford, MA, United States
Full-time

Residential Maintenance & Repairs Location:Various Residential Properties (Primarily in New Bedford & Fall River, MA) Pay:Competitive, Based on Experience Are you a skilled and reliable han... Show more

 • Promoted

Sr. Vehicle Maintenance Technician/DOT

FedExRaynham, Massachusetts, US
Full-time

Provides timely, quality maintenance for FedEx vehicle fleet and ground support equipment which requires preventative maintenance, troubleshooting, repairs, modifications, and documentation.Documen... Show more

Quality Assurance Technician

Empire Staffing IncNew Bedford, MA, United States
Full-time

Overview Empire Staffing is currently seeking a dedicated and detail-oriented Quality Assurance Technician to join our manufacturing team.In this role, you will be responsible for ensuring that pro... Show more

 • Promoted

Chimney Sweep Technician

The Chimney ChapHanson, MA, United States
Full-time +1

The Chimney Chap, located in Hanson, is a reputable and growing company who specializes in Home Heating Solutions, Masonry, & Outdoor Living Products.Established in 1980, our primary focus is w... Show more

 • Promoted

Certified Veterinary Technician

Brockton Animal HospitalBrockton, MA, United States
Full-time

Job Summary Join our veterinary team at Brockton Animal Hospital as a Certified Veterinary Technician, where your expertise will directly enhance the health and well-being of pets.In this vital rol... Show more