Talent.com
Quality Inspector I

Quality Inspector I

Luxfer SuperformRiverside, CA, US
10 days ago
Job type
  • Permanent
  • Quick Apply
Job description

​   QUALITY INSPECTOR I (1st Shift) LOCATION :

  • Riverside, CA                                       REPORTS TO :    Quality Manager PAY :  25 - 29 / HR depending on experience        SUMMARY : Quality Inspector I will perform inspection and testing of product to ensure adherence to established standards of quality.
  • This position is also responsible for operating mechanical inspection equipment to verify product for conformance to engineering requirements.

Under guidance, performs receiving inspection, incoming tooling inspection, first part buy-off inspections, systematic inspection of processes being undertaken by production and final inspection before shipping of product.  ESSENTIAL DUTIES AND RESPONSIBILITIES :

  • i nclude, but, are not limited to the following.  Other duties may be assigned.
  • Understand geometric dimensioning & tolerance in accordance with ANSI Y14.5.
  • Visually and mechanically measure and inspect parts utilizing a variety of tools including but not limited to micrometers, calipers, taper gauge, paint thickness gauge and vernier caliper Perform first part verification, in-process and final inspection of product.
  • Assist with First Article Inspection (FAI) performing bubble drawings with results documented.
  • Perform basic inspection tool calibration.
  • Read and interpret blueprints.
  • Measure parts in accordance with blueprints.
  • Operate CMM and / or Romer Arm using predetermined alignments, and calibrate as required.
  • Identify and segregate nonconforming product.
  • Review disposition on nonconforming product.
  • Supplies discrepancy sketches, as required for nonconforming product.
  • Assist with Root Cause and Correction Actions.
  • Review and approve Dimensional Inspection Plans (DIPs).
  • Support MRB regarding dimensional issues.
  • Maintain and archive documentation per established procedure.
  • Maintain inspection work instructions and procedures.
  • Maintain understanding and knowledge of quality procedures and work instructions.
  • Maintain a safe and organized workstation.
  • Provide support to the shop floor.
  • Follow all Company policy concerning environmental, health and safety.
  • Ability to work flexible hours and different shifts if required.
  • Ability to work in a safe professional manner adhering to all regulatory requirements including OSHA, EPA, State and Federal Regulations.
  • Importantly, as Superform’s success relies on the productivity of our team and adherence to customer product schedules, an essential function of this position is the ability to arrive at work on-time , as scheduled, in strict adherence to the Time and Attendance Rules Policy.

    • IMPROVED FUNCTIONING OF SHOP FLOOR :

  • Improved housekeeping through 6S culture Encourage team working Pro-active problem solving Waste reduction; operator waiting, inventory, transportation, motion.

    • Health & safety controls & procedures Comply at all times with current legislation Environmental standards in line with accreditations Company policy with regard to all matters Return to work & cause for concern interviews EMPLOYEE WELFARE :

  • Ensure all good Health and Safety practices are being followed.

    • Report Health and Safety concerns QUALITY :

  • Quality systems & procedures in line with accreditations; Quality Standards ISO 9001, AS 9100 and IS0 14001 Environmental Standards.

    • Support Quality Concern / Corrective actions QUALIFICATION REQUIREMENTS :

  • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The requirements listed below are representative of the knowledge, skill, and / or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • This position requires access to our export-controlled commodities, technical data, technology and services.  These items are restricted under the International Traffic in Arms Regulations (ITAR) to U.S.
  • Citizens, Lawful Permanent Residents of the U.S. and properly licensed foreign persons.  Therefore, employment is contingent on compliance with ITAR regulations and successfully obtaining and maintaining the necessary export authorization license from the U.S.
  • Department of Commerce’s Bureau of Industry and Security, U.S.
  • Department of State’s Office of Defense Trade Controls, or other applicable government agency.

    • EDUCATION AND / OR EXPERIENCE :

  • High School diploma or equivalent, minimum of three (3) years of experience as an inspector working in an Aerospace environment is required.
  • Employee must be familiar with safety requirements in a manufacturing environment.
  • Intermediate level of experience with Microsoft Office Suite and basic internet applications.
  • Ability to navigate through electronic file structures.
  • Strong verbal and written communication skills.
  • Ability to interpret blueprints and measure parts in accordance with blueprints.
  • Completion of Inspection Delegation Program (IDP) for In-Process and Receiving Inspection.

    • LANGUAGE SKILLS :

  • Ability to communicate in English with the ability to read and comprehend instructions, correspondence, handbooks, manuals, and blueprints.
  • Clerical skills must be in English and be at a level that will allow for correct and legible recording and reporting.  Must have the ability to effectively present information in English and respond in English to questions from Managers, Customers and Company personnel.

    • MATHEMATICAL SKILLS :

  • Competence in calculation and measurement skills required for the inspection of tooling and product.
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, decimals and metric.

    • REASONING ABILITY :

  • The ability to apply commonsense understanding to carry out instructions furnished in written and oral form Ability to solve problems and deal with variables.

    • PHYSICAL DEMANDS :

  • The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this position.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • While performing the duties of this job, the employee is required to stand, walk, sit, use hands to fingers; handle, or feel objects, tools or controls, reach with hands and arms, climb or balance, stoop, kneel, crouch and talk or hear.
  • The employee must be capable of lifting up to fifty (50) pounds on a regular basis.
  • Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

    • WORK ENVIRONMENT :

  • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • While performing the duties of this job, the employee is required to work within a controlled and non-controlled temperature environment ranging from 40 0 to 110 0 Fahrenheit.  Occasional exposure to wet and / or humid conditions may also occur.
  • The noise level in the work environment is usually moderate; however, employee will be exposed to an environment of dust and occasional high noise level.  Safety equipment will be provided.

    • Benefits :

  • Medical, Dental, Vision, EAP and Life Insurance 401k with Company match of up to 6% Company Paid Holidays (10 Days) Paid Vacation (Up to 2 weeks your first year) Paid Sick Leave (40 hours annually) Additional Information : $25.00 to $29.00 an hour depending on experience Monday through Friday 5 : 30 AM to 2 : 00 PM (Monday - Friday) We are committed to a safe, drug-free work environment and pre-employment drug screening, physical and background checks are required prior to starting.
  • Luxfer Superform is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities.

    • Women, minorities, and veterans are encouraged to apply.

  • This position requires access to our export-controlled commodities, technical data, technology, and services.
  • These items are restricted under the International Traffic in Arms Regulations (ITAR) to U.S.
  • Citizens, Lawful Permanent Residents of the U.S., and properly licensed foreign persons.
  • Therefore, employment is contingent on compliance with ITAR regulations and successfully obtaining and maintaining the necessary export authorization license from the U.S.
  • Department of Commerce's Bureau of Industry and Security, U.S.
  • Department of State's Office of Defense Trade Controls, or other applicable government agency.
  • We participate in E-Verify.
  • Candidates must be authorized to work in the US.
  • NOTICE FOR CALIFORNIA RESIDENTS Pursuant to the California Privacy Rights Act, if you are a California resident, you have the right to know the categories of personal information we collect and how it's used.

    • Please visit the site below to access our California Privacy Rights Act Policy for candidates and employees. https :

  • / / www.luxfercylinders.com / support-item / california-privacy-notice-to-applicants / ​ Powered by JazzHR
    • Create a job alert for this search

    Quality Inspector • Riverside, CA, US

    Related jobs
    • Promoted
    Quality Control Inspector

    Quality Control Inspector

    Marvin Test Solutions, Inc.Irvine, CA, US
    Full-time
    Are you a talented and experienced Quality Control Inspector looking for an exciting new opportunity? Look no further than Marvin Test Solutions! We work with some of the biggest names in commercia...Show moreLast updated: 4 days ago
    • Promoted
    Quality Inspector

    Quality Inspector

    Link Staffing - Orange CountyIrvine, CA, US
    Full-time
    We're looking for candidates with 5+ years of field experience as a Quality Inspector in the electronics manufacturing industry. Perform visual and dimensional checks various incoming products (...Show moreLast updated: 5 days ago
    • Promoted
    Quality Inspector

    Quality Inspector

    AerotekIrvine, CA, US
    Full-time
    The Quality Control (QC) Technician plays a pivotal role in ensuring the highest standards of quality by reviewing, inspecting, dispositioning, approving, and releasing raw materials, labeling, and...Show moreLast updated: 11 days ago
    • Promoted
    Sr. Quality Control Inspector

    Sr. Quality Control Inspector

    OrthAlign Inc.Irvine, CA, US
    Full-time
    Smart Technologies, growing medical device company, has an immediate opening for aSr.This role supports all quality initiatives and is responsible for quality control inspection of incoming materia...Show moreLast updated: 30+ days ago
    • Promoted
    Inspector II (88.25)

    Inspector II (88.25)

    American States WaterSan Dimas, CA, US
    Full-time
    Golden State Water Company is one of the largest investor-owned water utilities in the United States.We deliver quality, reliable water to more than 1 million people in over 80 communities througho...Show moreLast updated: 30+ days ago
    Quality Control Inspector

    Quality Control Inspector

    OurStaff, LLCLake Forest, CA, us
    Full-time
    Quick Apply
    We are looking for a an SMT Quality Control Inspector to join a contract manufacturing PCB company located in Lake Forest, CA. This is a temp to hire opportunity and we have 2 shifts.Must be able to...Show moreLast updated: 4 days ago
    • Promoted
    Building Inspector I / II Flex

    Building Inspector I / II Flex

    City of Corona, CACorona, CA, United States
    Full-time
    Building Inspector I : $5,258 - $6,391 / Monthly.Building Inspector II : $5,810 - $7,062 / Monthly.The City of Corona has an exciting opportunity to join our Planning and Development Department as a....Show moreLast updated: 9 days ago
    • Promoted
    Supervisor, Quality Control

    Supervisor, Quality Control

    StrykerIrvine, CA, US
    Full-time
    This position operates on the 2nd shift schedule from.The supervisor begins earlier to ensure a smooth and effective transition between the 1st and 2nd shifts. Lead and supervise QC personnel in dev...Show moreLast updated: 5 days ago
    • Promoted
    Aerospace Quality Inspector

    Aerospace Quality Inspector

    iStaffingCorona, CA, US
    Full-time
    We are currently hiring an experienced Aerospace Quality Inspector in Corona, Ca.If you have experience in aerospace manufacturing under AS9100 standards, proficiency in using Calipers and Mic...Show moreLast updated: 3 days ago
    • Promoted
    Quality Inspector

    Quality Inspector

    TradeJobsWorkForce92619 Irvine, CA, US
    Full-time
    Quality Inspector Job Duties : Inspects and approves incoming materials by confirming specificati...Show moreLast updated: 30+ days ago
    • Promoted
    Quality Control Inspector / Upland

    Quality Control Inspector / Upland

    EFP StaffingUpland, CA, US
    Full-time
    Manufacturing Pharmaceutical Label company located at Upland, Ca is seeking a qualified Quality Inspector with at least 6 months experience in this field. Training will also be provided in day shift...Show moreLast updated: 26 days ago
    • Promoted
    Quality Control Technician I

    Quality Control Technician I

    Bio-Rad LaboratoriesIrvine, CA, United States
    Full-time
    Quality Control department during the manufacture and release of Bio-Rad control products.This position will work both independently and in a team-oriented environment. This position is for a second...Show moreLast updated: 24 days ago
    Vehicle Quality Control Inspector

    Vehicle Quality Control Inspector

    The Redlands Chamber of CommerceRiverside, California, US
    Full-time
    Quick Apply
    The spirit of community, history, and culture all help make Redlands a great place to live, work and play.Join us in shaping your career or building your dream team – it's all within reach with the...Show moreLast updated: 7 days ago
    Quality Inspector - Level 3

    Quality Inspector - Level 3

    Summit Machine, LLCOntario, California, United States
    Full-time
    Quick Apply
    Without supervision, Level 3 Quality Inspectors will demonstrate extensive knowledge of Geometric Dimension and Tolerancing (GD&T) methods per ASME14. They will demonstrate expert level blueprin...Show moreLast updated: 25 days ago
    • Promoted
    1st Shift QA Inspector

    1st Shift QA Inspector

    AerotekIrvine, CA, US
    Full-time
    Shift QA Inspector – Irvine, CA | $DOE | 6am–2 : 30pm + OT.Join a growing medical device company and help ensure the quality of life-saving products!. Inspect materials and finished produc...Show moreLast updated: 30+ days ago
    • Promoted
    Quality Control Lead - Onsite (Orange County)

    Quality Control Lead - Onsite (Orange County)

    iRhythm Technologies, Inc.Orange County, CA, US
    Full-time +1
    The Quality Control Lead will support the execution of critical quality activities including Device History Record (DHR) review, Receiving Inspection (RI), and calibration / preventive maintenance re...Show moreLast updated: 6 days ago
    Quality Inspector Lead

    Quality Inspector Lead

    Summit Machine, LLCOntario, California, United States
    Full-time
    Quick Apply
    Lead all employees in the Inspection department.May plan work schedules, train and support inspection employees, provide input to Supervisor / Manager related to team performance and quality metrics,...Show moreLast updated: 25 days ago
    Quality Control Inspector

    Quality Control Inspector

    Rubicon Gear Manufacturing CoCorona, CA, US
    Full-time
    Quick Apply
    The Quality Control Inspector for Machined Parts is responsible for ensuring that machined components meet specified quality standards, tolerances, and customer requirements.This role involves insp...Show moreLast updated: 30+ days ago