Control & Automation Engineer

P&G Control and Automation Engineer (533272)

FTE Position

ONSITE - 2050 S 35th Ave, Phoenix, AZ 85009

Key : Rockwell SCADA, ROCKWELL HMI, ROCKWELL PLC.

Job Description & Skill Requirement:

Provide support for installation, commissioning, start-up and troubleshooting for various control and automation projects.

Design Control System Architecture (CSA).

Design electrical & control panel layout, control schematic drawings and Bill of Material (BOM).

Design, review and perform safety validation, safety maps, IQ/OQ, documents for new equipment installation at site.

Review vendor & engineering documents as per project requirement.

Provide support for PLC and HMI programming.

Development and Modification of PLC program.

Development of SCADA project as per customer needs.

Integration of Equipment system in the Plant.

Support Operation team for existing system.

Work with Project/Engineering team for new system.

Design feasibility study design basis document and detail engineering technical documents Cable schedule, Device List/ Tag List for new equipment / machine.

Understand the electrical drawings, P&IDs.

Perform Yellow lining, IQOQ, troubleshoot electrical circuits.

Understand the existing control system and provide support to reduce the current losses.

Design control study / URD (User Required Document) for the PLC & HMI programming.

Understand and Integrate Different systems in the plant.

Help the team understand the cause of loss based on historical data.

Design and review technical documents, such as engineering information, for the fabricator/contractor's activities to be performed in sequence at the site for site clearance and new installation.

Deliver complex, large-scale projects on time and within the budget in compliance with NEC, NFPA79, OSHA, S88, and PackML Standards.

Perform multi-discipline and vendor co-ordination for new equipment installation.

Skills:

PLC & HMI Programming: Rockwell Software - Studio5000 & RSLogix5000, FTView Machine Edition and Site Edition, Connected Component Workbench

Wonderware, Archestra

FT Batch

Plant PAX, PackML, PackTag, Upack & OPERA Programming's standards

Control Hardware: Rockwell PLCs e.g. GuardLogix, ControlLogix, CompactLogix, SLC500, MicroLogix, PLC5, Panel View Plus HMIs, Point I/O, Power Flex 520, 750 Series VFDs, Power Flex 7 Class, Power Flex 4 Class,

Qualification:

BE (Electrical, Instrumentation and control)