CNC Machinist - Set-Up Operator
JOB SUMMARY
This CNC Machinist will Set Up and Operate machine tools to machine metallic and nonmetallic workpieces for the Aerospace Industry by performing the following duties below.
Machines we operate :
Swiss : Tsugami BS20 and SS32
Lathe :
Twin Spindle / Single Turret : Eurotech
Single Spindle / Single Turret : Mori Seki, Haas
Twin Spindle / Twin Turret : Eurotech and Mori Seki
Horizontal Milling : Mori Seki, Mori DMG and Enshu
Vertical Milling : Haas and Mori Seki
ESSENTIAL DUTIES AND RESPONSIBILITIES
Knowledge of G&M Code is required for set up of the machines.
Required to set up and operate CNC machines using written instructions and set up sheets.
Responsible for setting up fixture and proving out programs for production to run.
Read and interpret process plans, blueprints, and part sketches to determine necessary machining, dimensional specifications, set up, and operating requirements.
Ability to edit pre-written programs.
Ability to edit and troubleshoot programs for process improvements.
Observe numerical control displays on the control panel and compare with the data on the process plan to verify dimensional adjustments, feed rates, and speeds of machining cuts.
Inspects first run pieces and spot checks succeeding pieces for conformance to specifications using operation certification knowledge.
Utilizes various types of inspection instruments to check work per print.
Completes necessary job-related paperwork to include tags, inspection documents, and production log.
Perform basic equipment maintenance : proper coolant levels, filters, fan operation, cleans machine, etc.
EDUCATION AND EXPERIENCE
High school diploma or GED.
10+ Years of Experience
Ability to read and interpret GD&T blueprints to the needed specification
Experience with Fanuc Controls
Ability to machine parts with extremely tight tolerances
PHYSICAL JOB REQUIREMENTS
Regularly required to stand and reach the duration of shift, 8-10 hours.
Occasionally required to walk, sit, stoop, kneel, crouch, or bend.
Frequently required to perform repetitive or short-cycles work.
Regularly lift, push, or pull up to 10 pounds and occasionally up to 50 pounds.
Strong work ethic : Willing to work OT to meet tight deadlines as needed.
Understands and observes all necessary safety procedures : safety glasses, shoes, ear protection, machine interlocks, lifting guidelines, etc.
as designated in specific work area assigned.
We are an Equal Employment Opportunity ("EEO") Employer. Applicant can learn more about Prince's status as an equal opportunity employer by viewing the federal "EEO is the Law" poster ( )
Benefits
BENEFITS
PTO days and 9 paid national holidays per year
Medical, Dental, & Vision Plans
Short and Long Term Disability Plans
401(k) Retirement Plan with strong employer match
Company paid life insurance & AD&D
100% tuition reimbursement for job relation classes
PPE reimbursement
CNC Machinist - Set-Up Operator
Required to set up and operate CNC machines using written instructions and set up sheets. This CNC Machinist will Set Up and Operate machine tools to machine metallic and nonmetallic workpieces for the Aerospace Industry by performing the following duties below. Knowledge of G&M Code is required for...
CNC Machinist - Set-Up Operator
Required to set up and operate CNC machines using written instructions and set up sheets. This CNC Machinist will Set Up and Operate machine tools to machine metallic and nonmetallic workpieces for the Aerospace Industry by performing the following duties below. Knowledge of G&M Code is required...
CNC Machinist - Set Up
Required to set up and operate CNC machines using written instructions and set up sheets. This CNC Machinist will Set Up and Operate machine tools to machine metallic and nonmetallic workpieces for the Aerospace Industry by performing the following duties below. Knowledge of G&M Code is required for...
CNC Machinist - Set Up
Required to set up and operate CNC machines using written instructions and set up sheets. This CNC Machinist will Set Up and Operate machine tools to machine metallic and nonmetallic workpieces for the Aerospace Industry by performing the following duties below. Knowledge of G&M Code is required...
CNC Machinist (Set-Up) 1st & 2nd Shifts
Local company in need of an experience CNC Machinist Set-up Candidate for either 1st or 2nd shift. Able to set up and operate CNC Machines. Must be able to stand for up to eight hours per day, be ability to move about, bend, stoop, push, use hands. ...
Forklift Operator Inbound
Company: US0037 Sysco West Coast Florida, Inc.Zip Code:34221Minimum Years of Experience:2 YearsEmployment Type:Full TimeTravel Percentage: 0COMPENSATION INFORMATION:The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison....
Property Maintenance Technician
Altis Promenade is looking for a maintenance technician who will use their maintenance experience and attention to detail skills to maintain the physical integrity of our properties. ...
Structural Welder
Must have working history as a 1st class Welder or six months to a year of experience as a 2nd class Welder. Currently seeking 1st class Structural Welder to work in Tampa, FL. Manipulate and operate all machines and tools essential to the performance of the position of Welder. ...
Forklift Operator 2nd shift
Operate an 16 fork industrial forklift. Keep forklift operating by following operating instructions, troubleshooting breakdowns, maintaining supplies, and performing preventive maintenance. ...
Structural Welder (Night Shift)
Flux Core 1/16" experience and the ability to fillet weld up to 6” thick.Experience with Sub Arc work, have knowledge of WPS and preheats.If you know UT or Xray welds that is a huge plus.Must own Welding hood, gloves, and hand tools.Pay Range $18 up to $24 depending on experience.Employee...