Field Layout Engineer

Looking for an exciting and rewarding career in commercial construction? We are seeking Field Layout Engineer for construction projects in the DC area.

Candidates must have a passion for team-based planning and problem-solving and be wholeheartedly commitment to building strong partnerships to support project goals.

Candidates willing to relocate and / or travel are preferred.

Position Summary As an Field Layout Engineer this position will include working with concrete carpenters to layout building locations, foundations, walls, embedded materials, and anchor bolts.

This position will make sure that the projects are built to the correct tolerances, and the quality that is required.

Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

• Plans, sets up, and maintains layout control for assigned construction project(s) and identifies unacceptable errors.
• Establishes building corners and permanent reference points to allow back checks of building location.
• Verify existing elevations shown on drawings used on roadways and utilities.
• Lay out column center lines and wall locations, and verifies that exterior skin is not encroached by main structure.
• Plumbs structural steel frame and check column alignments.
• Sets and maintains benchmarks and control lines on each floor for use in layout, and verify that workers are using proper elevations and control lines.
• Checks slab for elevation and alignment during concrete pours.
• Performs as-built surveys to verify correct placement of work and to identify conflicts between items of work (i.e., where concrete slab edge or walls have encroached on the exterior skin), and may help maintain as-built drawings.
• Assist other project staff in securing certified layout from independent engineering resources to establish monument and baseline control and to verify building corners and roadway entrances.
• Calculates earth, rock, and concrete quantities accurately.
• Assist with the coordination of shop drawings with contract drawings, verifies accuracy, and proposes solutions to discrepancies between the drawings.
• Responsible for care, maintenance, and calibration of engineering equipment.
• Compile and maintain project record and as-built documents. Ensures storage protocols are followed.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job.

Duties, responsibilities and activities may change at any time with or without notice.

Work Environment

The majority of work is completed outside at the construction site, and in an office trailer where they will monitor the project and make daily decisions about construction activities.

The position is often exposed to sounds and loud noises, such as construction equipment. The job requires they wear protective equipment when on the construction site (Hardhats, safety glasses, and high visibility clothing).

Temperatures and conditions may vary depending on the weather and seasons.

Expected Hours of Work Full time position, Occasional extended hours and weekends may apply.

Travel Minimal travel required, depending on the project, travel to other areas may be required. Majority of travel done during work hours;

overnight stays may be required.

Physical Demands While performing the duties of this role, the employee is regularly required to talk, listen sit, walk, reach, kneel, stoop, crouch, and use hands and fingers to handle or feel and to operate a computer keyboard and phone while maintaining visual acuity.

The employee may occasionally be required to lift and or carry lightweight (under 20 pounds) objects.

Required Education and Experience

Three (3) years of experience in Building Layout and using Total Station

Preferred Education and Experience

• Basic understanding of Trimble and Nikon equipment
• Deep understanding of research methodology, data analysis, and estimation metrics.
• Experience within General Trade Carpentry

Additional Eligibility Qualifications

• Well organized, excellent communication, and negotiation abilities.
• Strong attention to detail and accuracy.
• Knowledge of building construction, materials, systems, market conditions, trade practices.
• Must have conceptual ability to work with minimum information and quickly develop an understanding of the owner and / or architect requirements.
• Have the ability to read a Blueprint
• Complete knowledge of the estimating documents and the ability to provide accurate qualitative and quantitative analysis of the documents.
• Familiarity with construction project management software.
• Strong computer knowledge in Microsoft Word, Excel, Powerpoint and Outlook.

Notice to Recruiting Agencies (Unsolicited Resumes) : The Christman Company does not accept unsolicited resumes from agencies.

Please do not forward unsolicited agency resumes to our applicant tracking system, website, or to any Christman employee / affiliates.

Any unsolicited resumes sent to Christman employees or its' affiliates will be considered property of The Christman Company and will be processed accordingly.

Christman will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume without an executed agreement and assigned to a specific search.

The Christman family of companies is an Affirmative Action / Equal Opportunity Employer that is committed to diversity. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status.

Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time .

Job Posted by ApplicantPro